+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [Equipment] ResMed S8 Autoset II - Error Code 1029 (/Thread-Equipment-ResMed-S8-Autoset-II-Error-Code-1029)
ResMed S8 Autoset II - Error Code 1029 - Sinusoidal - 07-24-2015
Hello!
I have just acquired a used ResMed S8 Autoset II from a family member. It is throwing the 1029 error code (faulty PCB or motor). The device was working perfectly since it was last stored in it's case. I'm confident there is not actually anything wrong with it and that the onboard memory just needs to be reset. Before going and acquiring the ResMed USB adapter for this device (ResMed part #22203), I would like to know:
- Can the error code(s) be cleared without the ResMed service software?
- Does anybody have or know where to get the ResMed service software?
- Are the error codes stored with the sleep data on the ResMed smart card?
Thanks!
RE: ResMed S8 Autoset II - Error Code 1029 - trish6hundred - 07-24-2015
Hi Sinusoidal,
WELCOME! to the forum.!
I don't know anything about those error codes but hang in there for more answers to your question and much success to you with that machine.
RE: ResMed S8 Autoset II - Error Code 1029 - PaulaO2 - 07-25-2015
We don't have access to the Resmed service codes. If you check the Supplier's List (link at top of every page), there are two repair places listed. Contact them and see if they can answer your questions.
But, really, the best bet? Get a new/gently used machine. That thing is way old, probably not putting out the pressure it says it is (unless it is regularly checked and calibrated), and since it is now showing errors, it will only be downhill from here. If money is an issue, Check out Supplier #2 in the Supplier's List.
Machine choices
http://www.apneaboard.com/wiki/index.php?title=Archangle:Machine_Choices