ResScan Detailed vs. Summary Problem - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum) +--- Thread: ResScan Detailed vs. Summary Problem (/Thread-ResScan-Detailed-vs-Summary-Problem) |
ResScan Detailed vs. Summary Problem - tired as hell - 08-25-2015 I downloaded and installed ResScan without the drivers and configured it to download the "All Available Data" option, then downloaded data. But on the legend all the data has a "Summary Icon" next to it, and I'm not able to see any of the detailed graphs in the report. I have a AirSense 10 Cpap. Is the issue with the Cpap unit and what data it is recording to the SD Card, or is it with the ResScan software?? Any help would be greatly appreciated. Thanks RE: ResScan Detailed vs. Summary Problem - eseedhouse - 08-25-2015 We need to know the exact model. "AirSense 10" describes about four machines, not all with data capability. RE: ResScan Detailed vs. Summary Problem - tired as hell - 08-26-2015 The unit is a "ResMed Airsense 10 CPAP".... At least that is what it says on the front of it. I think it is the most basic unit and not an "Autoset" It was about $800.00 if that helps. Thanks RE: ResScan Detailed vs. Summary Problem - DeepBreathing - 08-26-2015 Unfortunately the S10 CPAP does not record detailed data, just the basics. If at all possible, see if you can exchange your machine for an S10 Elite or (preferably) an S10 Autoset. RE: ResScan Detailed vs. Summary Problem - zonk - 08-28-2015 (08-26-2015, 06:34 AM)tired as hell Wrote: The unit is a "ResMed Airsense 10 CPAP".... At least that is what it says on the front of it. I think it is the most basic unit and not an "Autoset" It was about $800.00 if that helps.I would get the machine replaced with the 'AutoSet', even if have to loose some money on the exchange Supplier #2, have the 'AirSesnse 10 AutoSet' include the heated tube $825.00, and $789.00 without the heated tube Talk to them, they might do a deal with you RE: ResScan Detailed vs. Summary Problem - tired as hell - 09-23-2015 Good news, The DME swapped out the Cpap for an Auto at no charge. Now that is what I call Customer Service!!! Is there a post that I can follow for how to use the resscan software and how to interpret all those squiggly lines?? RE: ResScan Detailed vs. Summary Problem - SuperSleeper - 09-23-2015 (09-23-2015, 09:15 PM)tired as hell Wrote: Is there a post that I can follow for how to use the resscan software and how to interpret all those squiggly lines?? Congrats on the auto machine! Here's some links to get you started: Go to the bottom of this page and there's a short video on ResScan: http://www.apneaboard.com/resmed-airsense-10-aircurve-10-setup-info For a more detailed ResScan video, go here: http://apneaboard.com/resscan.htm ResScan Report Interpretation Guide PDF here: http://www.apneaboard.com/ResScan_Interpretation-Guide.pdf Also, if you need the Clinician Setup Manual for your AirSense 10 machine, it can be sent out via email. Just follow the instructions in Section Three of this page: http://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual. You may also want to try out the SleepyHead software package (free) here: http://www.sleepfiles.com/SH2/ A pretty good SleepyHead Guide can be found here: http://www.apneaboard.com/wiki/index.php?title=Beginner%27s_Guide_to_SleepyHead |