+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [split] Respironics machine: what does it all mean? (/Thread-split-Respironics-machine-what-does-it-all-mean)
[split] Respironics machine: what does it all mean? - eddiestinson - 09-25-2015
I have never done anything but just push the knob to turn the unit on. Can someone please explain what if any of the options on the screen I should activate?
On the humidifier I have pushed the blue arrow button and refilled it with water. Is there anything else I should do?[/size][/font]
Sorry but I had a stroke and can't recall what I was told.
RE: [split] Respironics machine: what does it all mean? - OpalRose - 09-25-2015
Are you using a heated hose? If not, then if you just turn the round knob, you can set the humidify on 1 through 5. Try leaving it on 2 or 3 and make sure you have water in the chamber.
If you want to preheat the water in the chamber, about 15 minutes before you go to bed, turn the round knob untill "therapy" is highlighted, then press down on the round knob (don't turn it) and it will preheat the water.
RE: [split] Respironics machine: what does it all mean? - justMongo - 09-25-2015
(09-25-2015, 03:14 PM)eddiestinson Wrote: Sorry but I had a stroke and can't recall what I was told.
Eddie: Sorry to hear that.
RE: [split] Respironics machine: what does it all mean? - vsheline - 09-26-2015
Hi Eddie, welcome to Appnea Board.
Maybe it will help for you to request by email the setup manual (clinician guide) for your machine.
http://www.apneaboard.com/forums/Thread-Pressure-CPAP-Clinician-Setup-Manuals-Change-your-own-CPAP-Pressure
Remember to take the water tank out of the machine before moving it or turning it over to see its model number (REF#).
Take care,
--- Vaughn
RE: [split] Respironics machine: what does it all mean? - zonk - 09-26-2015
(09-25-2015, 03:14 PM)eddiestinson Wrote: I have never done anything but just push the knob to turn the unit on. Can someone please explain what if any of the options on the screen I should activate?Depend on the model ... Plus, SE, and models numbers below 450/460 does not have data options
vsheline gave you the link for the clinical manual, here setup information with pictures and a video
http://www.apneaboard.com/pr-system-one-philips-respironics-setup-cpap-clinician-menu-instructions