[Pressure] Help! - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: [Pressure] Help! (/Thread-Pressure-Help) |
Help! - joesarah2830 - 10-30-2015 I need a bit of help. My pressure is set at 11. When I first received the machine it would work it's way up to 11, not it starts at 11....How can I correct this so it starts at 4.5 and works to 11 RE: Help! - OpalRose - 10-30-2015 Welcome to Apnea Board joesarah2830, Request by email the clinicians manual for your machine. It will tell you how to setup the ramp and/or change your pressure settings. http://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual Have you just started therapy, or have you been on CPAP for awhile? Let us know if you have other questions. RE: Help! - zonk - 10-30-2015 (10-30-2015, 11:00 AM)joesarah2830 Wrote: I need a bit of help. My pressure is set at 11. When I first received the machine it would work it's way up to 11, not it starts at 11....How can I correct this so it starts at 4.5 and works to 11Hi joesarah2830 The machine in your profile "phillips respironics remsrar se", this thread may helps http://www.apneaboard.com/forums/Thread-Philips-Respironics-REMstar-SE-Setup-Menu-instructions Did you get machine through your insurance or bought on-line? The 'SE' model is not data capable machine, get the job done somewhat but does not report useful data for your doctor to see how the treatment is working RE: Help! - trish6hundred - 10-30-2015 Hi joesarah2830, WELCOME! to the forum.! You can turn on your ramp feature and that will start at 4 and work up to the pressure of 11. Hang in there for more responses to your post and much success to you with your CPAP therapy. |