+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Resmed AirSense 10 Report Period Function (/Thread-Resmed-AirSense-10-Report-Period-Function)
Resmed AirSense 10 Report Period Function - Samoht - 12-15-2015
New machine with 33 days of use. Period for report on the machine set for 1 month. Question: Is the reported data by calendar month, or by a 30~31 day period? After the period is met (day, week, month etc.) is it reset to the beginning of a new time interval and discards the earlier results, or just keeps averaging the data.
This issue has come up because my leakage values at day 33 are showing 20L/min., when the daily MyAir report from ResMed is averaging only 4L/min over the same 33 day usage period.
Sorry if this sounds anal, but it is not defined very well in anything I have found thus far.
Period: Set the time interval covered by the Sleep Report.
The options are: 1 Day / 1 Week / 1 Month / 3 Months / 6 Months / 1 Year
Any Help Would Be Appreciated!
RE: Resmed AirSense 10 Report Period Function - zonk - 12-15-2015
(12-15-2015, 03:52 PM)Samoht Wrote: Period: Set the time interval covered by the Sleep Report.You'll need to set period to 1 Day to see the same AHI as shown at the top part of the sleep report "events per hours" which is the AHI for last night or last time used the machine. whenever the machine powered down or unplugged, period revert back to default setting 1 Month. I've it set to 1 Day. The rest of the options are averages for the period selected
The options are: 1 Day / 1 Week / 1 Month / 3 Months / 6 Months / 1 Year
Any Help Would Be Appreciated!
Welcome and good luck
RE: Resmed AirSense 10 Report Period Function - trish6hundred - 12-15-2015
Hi Samoht,
WELCOME! to the forum.!
Much success to you with your CPAP therapy.
RE: Resmed AirSense 10 Report Period Function - dwd1249 - 12-16-2015
I found that my as10 defaults to 1 month if the power disconnected.
No big deal just have to reset it.
RE: Resmed AirSense 10 Report Period Function - Sleeprider - 12-16-2015
The statistics are based on 30 day rolling periods, not calendar months.
Similarly, 1-day is the most recent session. 7-day is the most recent 7-days. As far as the machine is concerned, there is no calendar, just days of treatment.