+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: How to Erase Data on Fisher & Paykel Machine (/Thread-How-to-Erase-Data-on-Fisher-Paykel-Machine)
How to Erase Data on Fisher & Paykel Machine - MarissaCPAP - 03-03-2016
Hi guys,
Need a little help please. Does anyone know how to erase the data on a Fisher & Paykel Auto/CPAP machine, after you have gone into the clinical settings menu????
Thank you !
RE: How to Erase Data on Fisher & Paykel Machine - trish6hundred - 03-03-2016
Hi MarissaCPAP,
WELCOME! to the forum.!
Hang in there for help with your machine and much success to you as you continue your CPAP therapy.
RE: How to Erase Data on Fisher & Paykel Machine - woozie38 - 04-26-2016
(03-03-2016, 01:14 PM)MarissaCPAP Wrote: Hi guys,
Need a little help please. Does anyone know how to erase the data on a Fisher & Paykel Auto/CPAP machine, after you have gone into the clinical settings menu????
Hi Marissa,
This is something I haven't yet had to do. But in the clinician's menu, turn the large outer ring so that the cursor is at the bottom dot. (6 O'clock), Press the centre button then turn the outer ring to the specific data you wish to erase. Press the centre button then using the outer ring reduce each value to zero. You will need to be careful not to erase data you should keep. Hope this is of help. Can't be more specific as I don't want to damage my data experimenting.
RE: How to Erase Data on Fisher & Paykel Machine - daves677 - 04-26-2016
Geoff, a refresher on how to get to the clinician's menu, please.
RE: How to Erase Data on Fisher & Paykel Machine - OpalRose - 04-26-2016
(04-26-2016, 11:08 AM)daves677 Wrote: Geoff, a refresher on how to get to the clinician's menu, please.
Fisher & Paykel ICON Auto, Premo & Novo: Start from the 12 o'clock position of the Home Screen. Press and hold the button in the middle of the SmartDial, and use your other hand to turn the SmartDial in a clockwise direction until you return to the 12 o'clock postion. Do not release the Smart Dial button while turning. Turn the SmartDial back (counter clockwise) one position while still holding down the button and the settings in the Clinician Menu will appear. You can now release the SmartDial button. NOTE: The Clinician Menu will default back to the Patient Menu after 30 seconds, or if the unit is turned off at the power supply. You can manually exit the Clinician Menu by repeating the instructions to enter the menu.
Order your manual here:
http://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual