+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: '0' AHI - "Is machine broken"? (/Thread-0-AHI-Is-machine-broken)
'0' AHI - "Is machine broken"? - GrammaBear - 05-31-2016
I don't read the SD card in my machine daily, but this morning I did put it in the card reader. The results confuse me because the AHI said it was '0'. I've been on cpap machine for 7 years and never had that number. I'm worried if something is wrong with my machine??
[attachment=2511]
RE: '0' AHI - "Is machine broken"? - trish6hundred - 05-31-2016
Hi GrammaBear,
You could unplug the power supply from the machine, sometimes, they get into a funk and don't read right.
Hang in there for more suggestions, hopefully, it is really 0 AHI.and good luck to you.
RE: '0' AHI - "Is machine broken"? - justMongo - 05-31-2016
GB: Post a daily page from Sleepyhead. Let's see what it's doing.
(reminder, redact your name from anything you post...)
RE: '0' AHI - "Is machine broken"? - GrammaBear - 05-31-2016
(05-31-2016, 02:23 PM)justMongo Wrote: GB: Post a daily page from Sleepyhead. Let's see what it's doing.
(reminder, redact your name from anything you post...)
I regret that I don't have a clue on how to post a daily page from Sleepyhead. I really am technically challenged.
RE: '0' AHI - "Is machine broken"? - justMongo - 05-31-2016
Press F12 when you have up the SH screen that has the Pie-chart plus the nights waveforms.
That will create a JPEG image screenshot.
Then follow the PO2 attachment treatise:
http://www.apneaboard.com/forums/Thread-How-to-Attachments
RE: '0' AHI - "Is machine broken"? - GrammaBear - 05-31-2016
(05-31-2016, 02:40 PM)justMongo Wrote: Press F12 when you have up the SH screen that has the Pie-chart plus the nights waveforms.
That will create a JPEG image screenshot.
Then follow the PO2 attachment treatise:
http://www.apneaboard.com/forums/Thread-How-to-Attachments
I might have made mistake, but tried to do what you advised in my first post.
RE: '0' AHI - "Is machine broken"? - chill - 05-31-2016
There are pressure changes so the machine was responding to something. It might be a SleepyHead display bug. Go to the Data menu at the top and select the Rebuild CPAP Data. Does that fix it?
RE: '0' AHI - "Is machine broken"? - eseedhouse - 05-31-2016
I have 0 AHI maybe half of my nights. But it's no big deal - what counts is how you feel!
RE: '0' AHI - "Is machine broken"? - GrammaBear - 05-31-2016
(05-31-2016, 03:51 PM)chill Wrote: There are pressure changes so the machine was responding to something. It might be a SleepyHead display bug. Go to the Data menu at the top and select the Rebuild CPAP Data. Does that fix it?
No, the screen still looks the same.
RE: '0' AHI - "Is machine broken"? - GrammaBear - 05-31-2016
(05-31-2016, 03:56 PM)eseedhouse Wrote: I have 0 AHI maybe half of my nights. But it's no big deal - what counts is how you feel!
Did you automatically 'know' everything was OK the first time it happened to you? For me, it is a shock because nothing like this has ever, ever happened to me. My machine is a 'gently used' machine purchased after my prior machine had to be replaced because the bearings went out on the motor. Don't get me wrong, I'm glad to have something good, just afraid because I didn't know what happened.