+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [CPAP] Newbie - CPAP Settings (/Thread-CPAP-Newbie-CPAP-Settings)
Newbie - CPAP Settings - Racman - 10-11-2016
Good Morning all from a sunny South Africa.
Great forum guys!
After completing a sleep study and with an AHI of 79 I took delivery of my DeVilbiss Sleepcube CPAP Auto adjust a week ago.
Over the last week the stats are as follows:
95th Percentile Pressure : 11.5
90th Percentile Pressure : 10.5
AHI : 14.5
Non-Obstructive Index : 6.5
Exhale Puff Index : 4
My machine is set to Minimum pressure of 6 and maximum of 14
and I wear a full face mask
My problem is that the blower is so forceful during the night that it wakes me up (too much pressure) and I have to turn the CPAP off and back on. My question is twofold - why is this happening and is my machine set correctly?
Best Regards
Rich
RE: Newbie - CPAP Settings - holden4th - 10-11-2016
Hello Racman
Welcome to the forum
What was the recommended CPAP setting from your sleep study?
Looking at your results I would raise the minimum pressure to at least 9 and not worry about the maximum at this point - set it as high as you want. The Devilbiss might take time to respond to apnea events so the closer you get to your 90% pressure the better.
Is Exhale puff relief actually some sort of exhalation pressure relief?
I don't know much about full face masks but how they are set/tightened can make a difference.
So that the real aficionados can comment download the Sleepyhead software and post some results. All the info about this is at the top of the home page.
Best wishes for your therapy and keep talking to us so we can help you. There are some amazingly knowledgeable people on this forum who can provide some great advice
RE: Newbie - CPAP Settings - Gordo - 10-11-2016
Hi Racman,
I have the Devillbiss Sleepcube Standard plus. In the manual on page EN - 7 "Using The Smartflex Feature" gives instructions about how to turn the SmartFlex Feature on and set the exhale relief pressure! Hope this helps.
Kind Regards,
Gordo
RE: Newbie - CPAP Settings - trish6hundred - 10-11-2016
Hi Racman,
WELCOME! to the forum.!
Hang in there for more answers to your questions and I wish you good luck with your CPAP therapy.
RE: Newbie - CPAP Settings - Racman - 10-12-2016
Thank you for the responses - much appreciated
@Holden4th - I do not have the data module on my CPAP so I can unfortunately not make use of the Sleepyhead software
I make use of a report generator supplied on the intellipap website, which makes use of the SmartCodes
Exhale puff is the events per hour where you breath through the nose and exhale through the mouth
@Gordo - Many thanks. I increased the minimum pressure to 9 as suggested and it made a huge difference AHI dropped to 6.5
@trish6hundred - Many thanks, I must admit it puts me more at ease to know there such a huge pool of intellects on this forum
Best regards