Apnea Board Forum - CPAP | Sleep Apnea
[Equipment] airsense 10 with philips dreamweaver mask - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [Equipment] airsense 10 with philips dreamweaver mask (/Thread-Equipment-airsense-10-with-philips-dreamweaver-mask)



airsense 10 with philips dreamweaver mask - abrun7 - 11-14-2016

First night done. A bit weird.
My machine registered no leaks. However, I can feel air blow out like a leak from where my climate line attaches to my mask.
Resmed climate line connected Respironics DreamWear intra nasal mask. There is white collar which fits snug into line, then the clear from the mask does not see to make an airtight seal. Any advice please


RE: airsense 10 with philips dreamweaver mask - Beej - 11-14-2016

All masks have some way to vent the air you exhale, rather than sending it back down the tubing. That may be what you are experiencing.


RE: airsense 10 with philips dreamweaver mask - abrun7 - 11-14-2016

Could be, there is a slit in the nasal section, I am more concerned with the junction were the mask attaches to the tube.


RE: airsense 10 with philips dreamweaver mask - Sleeprider - 11-14-2016

The Resmed Airfit P10 nasal pillows have a quiet vent that is nearly impossible to notice. No noise, no blowing air.

You will be assimilated. Resistance is futile.


RE: airsense 10 with philips dreamweaver mask - edfreeman - 11-15-2016

There are vent holes in the elbow that attaches to your hose, on the outside.