manual ramping? - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: manual ramping? (/Thread-manual-ramping) |
manual ramping? - longfoot - 11-26-2016 On the Resmed airsense 10 I can't find any way to ramp down the pressure manually. I used to be able to do this on my old machine when returning back to bed after a nature break. Is it possible with this one? RE: manual ramping? - Crimson Nape - 11-26-2016 Welcome to the forum! Your ramp settings will start every time you start your A10. You just need turn it off when you get up for the break. RE: manual ramping? - Rcgop - 11-26-2016 (11-26-2016, 02:08 PM)longfoot Wrote: On the Resmed airsense 10 I can't find any way to ramp down the pressure manually. I used to be able to do this on my old machine when returning back to bed after a nature break. Is it possible with this one? Your machine can set 2 starting pressures. Ramp off, it will start at the min pressure pressure. Ramp on, (any time setting) it will start at a different (must be lower) pressure setting. This ramp pressure is located in the clinical settings. Get to the clinical settings, turn ramp on, and a new pressure setting will appear. Every time you turn the machine off, then back on, the ramp will start over at these settings. RE: manual ramping? - trish6hundred - 11-26-2016 Hi longfoot, WELCOME! to the forum.! Good luck to you with your CPAP therapy, hang in there for more responses to your post. |