+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Setting the Time on RemStar Auto IQ 450 P (/Thread-Setting-the-Time-on-RemStar-Auto-IQ-450-P)
Setting the Time on RemStar Auto IQ 450 P - HenryECole81 - 01-29-2017
The time units readout on my RemStar AutoIQ 450P appears to be either not synchronized to the time zone I set in my Card Profile EST) or measuring on another base, such as hours after start. Daylight savings time is not checked in my profile. I assume time is either set on the machine, or programmed at the factory to somehow runs continuously by time and date on the machine without battery, and then is adjusted by the computer during readout based on the profile time zone and date. In either case I do not see the adjustment in the user manuals. If I start the machine around 12:00 the card readout seems to begin around 1:30.
Resent to include notification
RE: Setting the Time on RemStar Auto IQ 450 P - Crimson Nape - 01-29-2017
I believe that P-R devices are set to GMT at the factory and don't offer any setting. If you use SleepyHead for analysis, you can set a time offset in the Preferences section.
RE: Setting the Time on RemStar Auto IQ 450 P - HenryECole81 - 01-29-2017
(01-29-2017, 11:12 AM)HenryECole81 Wrote: The time units readout on my RemStar AutoIQ 450P appears to be either not synchronized to the time zone I set in my Card Profile EST) or measuring on another base, such as hours after start. Daylight savings time is not checked in my profile. I assume time is either set on the machine, or programmed at the factory to somehow runs continuously by time and date on the machine without battery, and then is adjusted by the computer during readout based on the profile time zone and date. In either case I do not see the adjustment in the user manuals. If I start the machine around 12:00 the card readout seems to begin around 1:30.
Resent to include notification
Thanks you, C-N. Yes I see the place to offset the time. I will check to see exactly when I turn on the machine tonight to make an exact comparison.Assume it will be one hour, but offset will permit more precision. Strange that the readout time does not shift when I change the profile from daylight to non daylight. I guess I could also change my time zone.