Apnea Board Forum - CPAP | Sleep Apnea
Hacking second hand machine for stats - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Hacking second hand machine for stats (/Thread-Hacking-second-hand-machine-for-stats)



Hacking second hand machine for stats - dwhite4490 - 02-11-2017

Here's my story. I used CPAP for several years until my machine broke down. Unfortunately, when I went to get a new machine they said I needed a new prescription. Also unfortunately, my sleep doctor had moved to another state. So, I had a whole new sleep study. The folks who administered the study said I would need to spend $2000 for a new machine and doctor to set it--all for some reason not covered under insurance. So in a rebellious and angry impulse I bought a slightly used Airsense 10 thinking I could treat myself. Triply unfortunately, the Airsense is not an Autopap and I do not seem to be able to access detailed statistics to guide me. For some reason Sleepyhead (mac version) does not show any details about AHI. Also, when I try to use the built-in/online MyAir I cannot use it because serial number, etc were used by former user. 

I have used the Cpap for three nights and I seem to feel better. But I would like to be able to be more precise about my (self) treatment.  Is there any way to hack the MyAir feature or to get a version of Sleepyhead or another software that will read my SD card from the machine?  

Frustrating, 
D.


RE: Hacking second hand machine for stats - OpalRose - 02-11-2017

First, if you have the Airsense 10 Cpap, you wont be able to get any data from it except hours of use and AHI. It's what we call a "brick".

Even though you don't have the autoset, if you have the Airsense 10 Elite, it is data capable and you can use #SleepyHead.

Hacking "My Air" even if possible to gain access to prior users data would be illegal.


RE: Hacking second hand machine for stats - justMongo - 02-11-2017

Airsense is an entire series of machines. Look at the lower right -- It will say ResMed Airsense -- and under that, in smaller print, will be the specific name of your machine. Let's get that first.


RE: Hacking second hand machine for stats - dwhite4490 - 02-11-2017

So, as I said and you suspected, my model is the brick version, Airsense 10 CPAP.


RE: Hacking second hand machine for stats - dwhite4490 - 02-11-2017

Just to be clear, I was never hacking MyAir to view someone else's data, but seeking a way to get more specific data--especially since SleepyHead does not seem to register anything but a 0 for AHI, and ResScan does not have a mac version.


RE: Hacking second hand machine for stats - Sleeprider - 02-11-2017

dwhite, you should be able to get some basic therapy information from your Airsense 10 CPAP. Enter the clinical menu (control knob + Home) and go into settings. Scroll down to Essentials, and if available set to Plus. This will give you the basic AHI and pressure information on-screen. At least it does for the other machines. Let me know if it doesn't work.


RE: Hacking second hand machine for stats - Sleeprider - 02-11-2017

(02-11-2017, 01:09 PM)dwhite4490 Wrote: Here's my story. I used CPAP for several years until my machine broke down. Unfortunately, when I went to get a new machine they said I needed a new prescription. Also unfortunately, my sleep doctor had moved to another state. So, I had a whole new sleep study. The folks who administered the study said I would need to spend $2000 for a new machine and doctor to set it--all for some reason not covered under insurance. So in a rebellious and angry impulse I bought a slightly used Airsense 10 thinking I could treat myself. Triply unfortunately, the Airsense is not an Autopap and I do not seem to be able to access detailed statistics to guide me. For some reason Sleepyhead (mac version) does not show any details about AHI. Also, when I try to use the built-in/online MyAir I cannot use it because serial number, etc were used by former user. 

I have used the Cpap for three nights and I seem to feel better. But I would like to be able to be more precise about my (self) treatment.  Is there any way to hack the MyAir feature or to get a version of Sleepyhead or another software that will read my SD card from the machine?  

Frustrating, 
D.

I wanted to comment on how you were being ripped off.  A new sleep study is not needed, provided any doctor, dentist or other prescribing professional agrees you likely have sleep apnea and would benefit from CPAP.  In your case, your prior diagnosis and prescription should be sufficient evidence.  Even new patients can be diagnosed by questionaire, or a home study (See Supplier #30).  Once you have a prescription for CPAP, an auto CPAP can be used for self-titration.  Again, no need for a titration study, especially if insurance is not involved.  You could buy a Philips Dreamstation Auto CPAP with heated humidifier and heated hose on Amazon for about $440, and never be asked for any prescription.  The Resmed Autoset tends to run $700-800, and is also available from Supplier #2 with a prescription. 

If you can track down your old doctor, you could request your records of diagnosis and prescription, and that would suffice for any online order.  As mentioned above, Supplier #30 and others will provide prescription services.  You have lots of choices, and sorry you didn't check here first.


RE: Hacking second hand machine for stats - trish6hundred - 02-11-2017

Hi dwhite4490,
WELCOME! to the forum.!
Good luck to you with your CPAP therapy.


RE: Hacking second hand machine for stats - Mosquitobait - 02-11-2017

I got a used Airsense for Her. I just created a new account, added the serial number and it worked fine. Did you clear the SD card first? Maybe that's why it's not setting up.