+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [Pressure] ResMed S9 Autoset Locked (/Thread-Pressure-ResMed-S9-Autoset-Locked)
ResMed S9 Autoset Locked - 2beatCHF - 02-22-2017
Hi – my first time here.
I can get to the clinician page on the LED monitor, but can't select a setting -- so that I could change the pressure
Any guidance would be appreciated!
RE: ResMed S9 Autoset Locked - 2beatCHF - 02-22-2017
Ah ha – found that simply pushing down on the button allowed me to select settings and then cruise through them.
I want my AHI below three, correct? I can't figure out why it is significantly higher, but will try to reduce the EPR From the 3 that it has been, Reading that that helps some people in your threads.
RE: ResMed S9 Autoset Locked - justMongo - 02-22-2017
More likely, you will need a higher minimum pressure.
I suggest you download #sleepyhead and post some nightly graphs.
RE: ResMed S9 Autoset Locked - OpalRose - 02-22-2017
Hi 2beatCHF,
An AHI <5 is treated, but lower is sometimes better.
EPR is a comfort setting, and is fine to use unless you experience alot of Clear Airways.
You may want to download #SleepyHead software, and start to track your therapy.
RE: ResMed S9 Autoset Locked - trish6hundred - 02-22-2017
Hi 2beatCHF,
WELCOME! to the forum.!
Hang in there for more responses to your post, good luck to you as you continue your CPAP therapy.