+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Auto ramp (/Thread-Auto-ramp)
Auto ramp - Codelode84 - 03-14-2017
I have an AirCurve S 10 and got an e-mail about the auto ramp feature. I can't get my machine to do this for anything. I go to the far right in the menu and it say no or 0 ramp. Then the minutes begin. Then the minutes go up from there and no where in the menu is auto ramp please help. What am I missing. I have been told all models have auto ramp is this incorrect? Thank you.
RE: Auto ramp - justMongo - 03-14-2017
Which Aircurve do you have? 10S or 10 VAuto...
RE: Auto ramp - Sleeprider - 03-14-2017
Ramp is available on our machines, but it may not be enabled for patient access. To change that you need to enter clinical settings by pressing the control knob and home button (low center) at the same time, then select clinical settings. While you're scrolling through, you should note your settings for EPAP IPAP and pressure support. Once you figure out what machine you have, you can even download the clinical manual at the CPAP Setup Manuals link at the top of the page. Couldn't hurt to get #Sleepyhead software so you can see what's going on and if the therapy is working.
Auto Ramp can easily be selected from the settings in the Clinical menu. Let us know how it works out.
RE: Auto ramp - trish6hundred - 03-14-2017
Hi Codelode84,
WELCOME! to the forum.!
Good luck to you with your CPAP therapy and getting it dialed in to better meet your needs.