+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Fisher paykel 254 (/Thread-Fisher-paykel-254)
Fisher paykel 254 - Sanilac04 - 03-22-2017
Can anyone tell me how to adjust pressure. I saw post that machine has square in back and to pop out and adjust dial. There is no dial.
RE: Fisher paykel 254 - OpalRose - 03-22-2017
(03-22-2017, 01:09 PM)Sanilac04 Wrote: Can anyone tell me how to adjust pressure. I saw post that machine has square in back and to pop out and adjust dial. There is no dial.
Hi Sanilac04,
I found two sets of instruction. Not quite the Model you list, but the directions may be the same for your machine.
Fisher & Paykel HC 234: Enter programming mode by holding down the "Ramp" (top) button and the "Next" (Right arrow/bottom button) for three seconds. When you get into the pressure set mode you will first be able to set adjust altitude, which is indicated by a drawing of a mountain range on your screen. You can change or ignore this setting and then push the "Next" (Right arrow/bottom button) to advance to pressure setting which will be indicated by the characters "cm h20 " on the screen. Use the Up and Down keys to change the pressure setting. Lastly, push the bottom button again to exit programming mode.
Fisher & Paykel HC 220 & 220LE: On the side of the machine where the power switch is, you should be able to see a little small cut-out shape like a square, or hidden door. Simply push and pull down and it should slide off, under that there is a black dial that you turn up or down to change the pressure. (note: the right dial, not the left). Right in front of the adjuster knob is an LCD window that will give you the current pressure setting.
RE: Fisher paykel 254 - trish6hundred - 03-22-2017
Hi Sanilac04,
WELCOME! to the forum.!
Good luck to you as you continue your CPAP therapy, and also with getting your pressure set.
RE: Fisher paykel 254 - Sanilac04 - 03-22-2017
Thanks so much. I think I figured it out.