Sleepy head shows Summary Only :( - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum) +--- Thread: Sleepy head shows Summary Only :( (/Thread-Sleepy-head-shows-Summary-Only) Pages:
1
2
|
Sleepy head shows Summary Only :( - aeilers - 05-15-2017 Summary Only But it did give me Saturdays info correctly the days before said Summary Only... I did have the card in the reader for like a week now. Is there a setting I am missing? RE: Sleepy head shows Summary Only :( - Crimson Nape - 05-15-2017 Try rebuilding the SleepyHead data. RE: Sleepy head shows Summary Only :( - Raven87 - 05-15-2017 At the top of the Sleepyhead screen are multiple tabs that say things like Daily, Statistics, Overview, etc. Have you tried selecting different tabs? Here is one of my charts - note the white tabs at the top and that 'Daily' is in blue because that is what is selected. Also, your card should only have to be in the reader a very short time, such as about 30 seconds or so. RE: Sleepy head shows Summary Only :( - aeilers - 05-15-2017 My saturday looks OK like this.... http://imgur.com/Sz1u3WM The days before than show http://imgur.com/a/mcS5a Even though card has been in for about a week RE: Sleepy head shows Summary Only :( - OpalRose - 05-15-2017 aeilers, On the second graph that says summary only..... Once in SleepyHead, go to the daily page that shows summary only, then look at the very bottom right of the page and click on the graphs arrow. The arrow should be facing down. That should turn them on. RE: Sleepy head shows Summary Only :( - aeilers - 05-15-2017 it wont let me change it... i click and nothing happens RE: Sleepy head shows Summary Only :( - OpalRose - 05-15-2017 Ok, sorry. I'm not sure what the issue is, but it sounds like maybe you didn't have the SD card in your APAP during those days......or the card was write protected when in the APAP. RE: Sleepy head shows Summary Only :( - aeilers - 05-15-2017 is there a way to put card back into machine and get back data ? My setup in machine is sd micro into a adapter.. then when I take it to the computer I take micro out and then into a micro usb reader.. i thought about clearing the micro card via computer and putting back into machine and try again RE: Sleepy head shows Summary Only :( - TASmart - 05-15-2017 The detailed data is only stored on the SD card, the machine only stores summary data, so it looks like unless you can rebuild the data and it works you are out of luck. RE: Sleepy head shows Summary Only :( - quiescence at last - 05-15-2017 on the chart you posted for May 12, it looks like you somehow clicked on "Events" tab. You should try to go back to May 12, and see if you can select the "Details" tab. hope that works. QAL |