Apnea Board Forum - CPAP | Sleep Apnea
Don't know what happen last night time warp - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Don't know what happen last night time warp (/Thread-Don-t-know-what-happen-last-night-time-warp)

Pages: 1 2


Don't know what happen last night time warp - dwd1249 - 06-12-2017

Seems like my as10 had a hiccup. Either that or it stopped and I didn't know it.
Only thing I did yesterday was changed filters and told the machine I now had a Universal Bacteria Inlet Filter.
Guess it's suck it and see what happens tonight.

[Image: U3FX7Q3.png]


RE: Don't know what happen last night time warp - CB91710 - 06-12-2017

Wow... How did it shut down and you didn't wake up? There's no way I could sleep through a nasal not flowing, and even with a full-face, I wouldn't be able to sleep through JUST the anti-asphyxiation vent.

That has to be a data loss glitch.
That pressure spike were it cut off is suspicious.


RE: Don't know what happen last night time warp - quiescence at last - 06-13-2017

you did great for 50 minutes! ha ha. sometimes my machine scrambles data if I try to take the SD card out within 30 seconds of shutting it off.

QAL


RE: Don't know what happen last night time warp - Sleeprider - 06-13-2017

Be sure to do a full power cycle on the machine, unplugging it from the adapter for few minutes, then re-powering. This looks like a data glitch, and it is usually resolved in a power cycle.


RE: Don't know what happen last night time warp - sonicboom - 06-13-2017

(06-12-2017, 11:09 PM)dwd1249 Wrote: Seems like my as10 had a hiccup. 
During the evening of the 11th mine too had a data glitch but not for nearly as long as yours.  Mine was for about 30 seconds.  But interestingly enough, there was then about 25 minutes of data that the machine and ResScan didn't add to the data calculations but Sleepyhead did. Recycle power.  Alls well .


RE: Don't know what happen last night time warp - dwd1249 - 06-13-2017

Back to normal last night . The data glitch night was after the machine was off for half a day while I was driving home.
I think that was the first time since I got the as10 Dec 3 15.

[Image: I5GuAyc.png]


RE: Don't know what happen last night time warp - kwhenrykerr - 06-13-2017

I read a wise comment from DeepBreathing.

Unplug the machine from the power for 30 min. Do not just turn it off. Pull the plug.

Sleep-well


RE: Don't know what happen last night time warp - OMyMyOHellYes - 06-18-2017

Time warp?

It's just a jump to the left .......

And then a a step to the riiiiiiiiiight!

Put your hands on you hips ...

And bring your knees in tiiiiiiight!


RE: Don't know what happen last night time warp - BrassCat - 06-18-2017

With my prior Philips auto Cpap, I had problems with my cat getting on the night stand and walking over the Cpap machine, stepping on the On/Off button, turning the cpap off. I found a nicely size large rubber grommet to put around the on/off button to protect the power button from the cats paw. If your machine has an auto-on function, your breathing would turn the machine back on. Looks like what my Dream station does if the machine is off, or loss of power.

Stan


RE: Don't know what happen last night time warp - BrassCat - 06-18-2017

Look at the bottom of your left window, SESSION WINDOW. The bar graph is reading two sessions with a large off period between. You will need to scroll down (in sleepyhead) to see both session details, but the first shows the session was only 39min. Not just a data glitch but the machine stopped recording. Scrolling down will show info on the "morning session".

Stan