Apnea Board Forum - CPAP | Sleep Apnea
flashair file structure? - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum)
+--- Thread: flashair file structure? (/Thread-flashair-file-structure)



flashair file structure? - Jeffmc - 06-30-2017

I recently had a minor power drop at my house.  The computer rebooted and some of the clocks needed resetting but not all.  Later I tried to download my CPAP data from my FlashAir card.  I could not get a connection.  The message from FlashPap said to remove SD  card and re-insert.  So I did and still nothing.  I took the card out and put it in a card reader on my computer and could download my data.  I looked at the files on the SD card and I saw nothing for the WIFI portion.  I started to rerun the Toshiba software but that said that all data on the card would be lost.  I really do not want to copy the data for the CPAP, run the Toshiba software and re-copy the CPAP data.  That is one solution.  The other is if someone could tell me the file structure for the WIFI info, I could just put it back.  I think that the only file that makes a difference is the CONFIG file. 

Can someone look at their file structure and tell me what it looks like?

Thanks


RE: flashair file structure? - Crimson Nape - 06-30-2017

What program are you using to download the FlashAir's data? The FlashAir uses the directory SD_WLAN for the CONFIG file. When you get it restored make a backup copy on your PC.


RE: flashair file structure? - AlanE - 06-30-2017

To add one thing, the SD_WLAN folder is normally a hidden folder. If you do not see it you can enable hidden files and folders.

If you're using windows 10, type file explorer options in Start menu or taskbar search box. Click on the view tab and check show hidden files. folders and drives.


RE: flashair file structure? - Melman - 06-30-2017

The SD_WLAN folder may not show unless you select show hidden files under folder options in control panel. That's the case with my Windows 7 laptop.

You may have it and not be seeing it. Go to control panel and click on folder options. Then select the view tab. There will be be a line reading "don't show hidden files" and another reading "Show hidden files"  If you select show hidden you may see the SD_WLAN file is there.

I see AlanE responded with instructions for Windows 10. Mine are for Windows 7.


RE: flashair file structure? - CB91710 - 06-30-2017

And I can't find an option to enable viewing it when mapped with a network drive letter... only the non-hidden contents show (Datalog, Dcim, Settings)


RE: flashair file structure? - Jeffmc - 07-01-2017

Thanks to all.  I got it going again.  I also put the /DCIM directory on the ss card also since the .jpg file is listed in the CONFIG.  I do not know if that is necessary or not.

Here is my CONFIG file since I noticed that some people were having problems connecting through the wireless on their router.  I assigned the SC card address 192.168.1.15.  I normally do this on storage devices on my network.  Then I have control.

This is not a technology that I would put into a production environment.  The link seems weak and recovery is not as auto as I would like but works well enough for home.

CIPATH=/DCIM/100__TSB/FA000001.JPG
APPMODE=5
APPSSID=***wireless name
APPNETWORKKEY=****wireless password
LOCK=1
VERSION=1234567890123456
CID=12345678901234567890123456789012
PRODUCT=FlashAir
VENDOR=TOSHIBA
APPAUTOTIME=0
UPDIR=/DCIM
UPLOAD=1
DNSMODE=1
WEBDAV=2
FORMATSETMODE=0
NOISE_CANCEL=2
ST_RETRY_CT=0
WLANAPMODE=0X03
DHCP_Enabled=NO
IP_Address=192.168.1.15
Subnet_Mask=255.255.255.0
DEFAULT_GATEWAY=192.168.1.1

Thanks again.  Great Forum


RE: flashair file structure? - mckawa - 08-12-2017

Hi,

Glad you revived your flashair card. Sleep-well

I also suffer "frequent" power outages. These outages regularly corrupt both SD and Flashair cards.

With 2 sleep apnea sufferers we have 2 ResMed s10 auto machines and both corrupt the memory cards.

My revival procedure is,

I keep backups of the files on the Flashair cards and the restoration of these files is my first step.

Often I need to use the flashairtool to initialise the card then restore the files.

Occasionally the card won't read in a reader or the S10 cannot write to the card.  I then have reformatted the card with the windows 7 or10 utility by unticking the quick format box and set to FAT 512 to format. I then initialise and restore the backup to the card.

I hope this is some help to anyone else who reads your thread.


RE: flashair file structure? - Crimson Nape - 08-13-2017

(08-12-2017, 08:44 PM)mckawa Wrote: I also suffer "frequent" power outages. These outages regularly corrupt both SD and Flashair cards.

I would suggest that you invest in a UPS (Uninterruptible Power Supply) to prevent down time and the electrical surge that accompanies power restoration.


RE: flashair file structure? - Jeffmc - 08-13-2017

Interesting enough that we had a minor power outage the other night and the Flashair card was corrupted again.  I think I have recovered but lost 4 nights of data.  Looking at the FlashAir card that is 32 GB in size the bad four directories all listed the size of the directory as 132 GB.  I re formatted and also ran some performance test to ensure all is well.

I did learn my lesson and now have a directory that I keep all the data as well as where sleephead and FlashPap keeps the data.  The UPS may be a good answer.  I have all on surge protectors but that is not positive.  A couple of months ago, we had a lightening strike within 50 feet of the house and I lost my internet antenna and router that were on the surge protector and my dish washer.  Most devices only let the lightening strike get closer before it gets you.  The strike was way to close for my wife, my cat and me. :-)


RE: flashair file structure? - CB91710 - 08-15-2017

I have a couple of the inexpensive ($50 or so) small battery backups that are a little bigger than power strips on my entertainment center. Partly to maintain my landline connection (though the cable modem has its own battery), but mainly to prevent all of the "tech" gear including the cable TV box, routers, and "Smart" hubs from having to reboot after short outages.

90% of our outages... few as they are... last only a few seconds to a couple of minutes.

I should probably install a pair upstairs for the machines, but we've never had any corruption problems, either from power outages, or from unplugging the machines for vacation (moving every night for a week).