+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [Equipment] REMstar Pro C-Flex+ service required message (/Thread-Equipment-REMstar-Pro-C-Flex-service-required-message)
REMstar Pro C-Flex+ service required message - Sultec - 07-01-2017
I get a service required message on my REMstar Pro C-Flex+ with no error code. Lights flash, and after a few moments, the air stops. Unplugging the machine and replugging it seems to reset it for differing periods before the problem reappears. There is nothing in the manual about this. Any suggestions?
RE: REMstar Pro C-Flex+ service required message - DavePaulson - 07-01-2017
I would guess failing main board. How many hours are on the machine?
RE: REMstar Pro C-Flex+ service required message - Sleeprider - 07-01-2017
I assume this is an old machine. You could replace it with a new Dreamstation Auto for $360 on Amazon. That will be less than repair costs.
RE: REMstar Pro C-Flex+ service required message - Sultec - 07-01-2017
Blower hours total 17000.6 start date 12/11/2009
RE: REMstar Pro C-Flex+ service required message - Sleepster - 07-01-2017
There is an error code recorded on the SD card, but it's not easy to read.
RE: REMstar Pro C-Flex+ service required message - Sleeprider - 07-02-2017
(07-01-2017, 05:53 PM)Sultec Wrote: Blower hours total 17000.6 start date 12/11/2009
If you have an M-Series, your machine needs to be replaced. Will you be using insurance, or purchasing directly?
If your machine is the System One 50 Series this post may help you fix an error http://www.apneaboard.com/forums/Thread-CPAP-Service-Required-Error-Codes-Inner-Workings-of-a-CPAP-machine?pid=203661#pid203661
RE: REMstar Pro C-Flex+ service required message - Sultec - 07-19-2017
Probably using insurance when I get around to it. Still have an even older CPAP that is still running.