Apnea Board Forum - CPAP | Sleep Apnea
Some data.. - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Some data.. (/Thread-Some-data)



Some data.. - Phatkid77 - 07-10-2017

So found manual for my trial machine 
ICON PREMO
my AHI was only 7 before trial period. 
Looking at some data I see the machine says I'm AVG 1.7AHI (only been 6 days)

One thing said. 30 I/min?? Not sure what that is. 
I was curious about leak rate and how much over 90% I am, but couldn't figure out what numbers they'd be


RE: Some data.. - Phatkid77 - 07-10-2017

So. Did and doing more research.
Using the F10.
4cm....22L/min
8cm.....32L/min

My pressure is at 7?? (Which isn't listed. But at first glance seems unacceptable)
Also. I'll have to relook when I can as I saw a number, which may have been my 95% leak rating
Which I'm GUESSING was like 42 80 or 48 80. Like I said. Just guessing. Lol


RE: Some data.. - Crimson Nape - 07-10-2017

Extrapolating from the numbers you've provided, 7cm would have a leak rate close to 29.5L/min, if it were linear.  Knowing that a mask's leak rate in non-linear, I'd say 30L/min is correct or close enough.  Is the '95' you are quoting percent or percentile?  There is a difference.


RE: Some data.. - Phatkid77 - 07-10-2017

Just looked at the manual. Says the 90th percentile.
And the numbers I see on machine
42 68?


RE: Some data.. - Phatkid77 - 07-10-2017

I also just looked and there's a number 13.
I'm thinking 90th percentile pressure is what it's referring to
Googling now lol


RE: Some data.. - ajack - 07-10-2017

1.7 is working for you, does it give a breakdown on oa/h/ca?


RE: Some data.. - Crimson Nape - 07-10-2017

I am only guessing here, but I think the numbers might be listing unintentional leak and total leak..  The 90 percentile would mean that your leak was at or below those numbers 90% of the recorded time.    Does the Icon have a mask setting feature for different type of masks or a mask leak rate? I'm totally ignorant about your machine and its features.


RE: Some data.. - Phatkid77 - 07-10-2017

And to reiterate.
Minimum pressure is 5. Max is 7.... and if I'm researching properly it's saying 13 is my 90th percentile?
Like I've been saying. I'm questioning trying a different mask since I'm tired. But AHI is 1.7 past week.
And last nite was 2 AHI and 16 median (think I took mask off to scratch nose. Then pst out for hour? Lol)


RE: Some data.. - Phatkid77 - 07-11-2017

Well. I shut the senseawake off last nite and AHI went up to like 3 or 3.2
Going to store and try the simplus I got titrated on