+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [Equipment] Trouble shooting resmed 100 (/Thread-Equipment-Trouble-shooting-resmed-100)
Trouble shooting resmed 100 - Sleep1ngb3auty16 - 08-03-2017
I hope some one can help? I've had a little flashing blue snowflake flash at the top of the screen. I can't get rid of it. Have noticed my face mask has become a little Noisey when I'm breathing. Any ideas how to get rid of snow flake icon? I use the humidifier quite a bit and usual have it on about 2. I've had the machine since March. Not liking it much finding it annoying and uncomfortable. Thought I'd ask here before I get the clinical nurse out. Thanks
RE: Trouble shooting resmed 100 - edfreeman - 08-03-2017
The snowflake means it is cooling down the humdifier after you've stopped it by flowing a small amount of air with no heat. It is normal. If you put the mask on and restart, then snowflake should disappear. It will also disappear if you turn on the pre-heat.
RE: Trouble shooting resmed 100 - OpalRose - 08-03-2017
You can request the Clinicians Manual by email here:
http://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual
Just be sure to request by the exact name and model number of your machine.