Apnea Board Forum - CPAP | Sleep Apnea
Where's the leak??? - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Where's the leak??? (/Thread-Where-s-the-leak)



Where's the leak??? - Jeffo1 - 08-20-2017

Hi!

I seem to be having some strange Leak readings and I'm not experiencing any significant mask leaks since I've adjusted the mask very tight.  Do you think that there is a problem with my Bi Pap machine?

Also, why isn't Sleepy Head using my full night's data?  When does a day end and a new day begin?  It still wouldn't explain why there's only one hour of data reported.  Any thoughts??


Best,

Jeffo1

[url=[Image: Tsx8MMa.png]
[[Image: vJetT1x.png]


RE: Where's the leak??? - PaulaO2 - 08-21-2017

Too tight a mask can cause leaks.

For something like that, though, I'd be suspicious of a hose with a crack or the hose not being on all the way on one end or the other. Hook everything and listen.
See if you can ear a solid hiss, not one that shifts with your breathing.
Run your finger gently along the edge where the mask touches your face. You may not even feel the leak but hear the sound change.
Make sure the mask is assembled correctly. Take it apart from machine to mask and reassemble, making sure each part is together.
Gently hold the hose and move it. Does the sound change? Run your hand along the hose to feel for a leak. Again, you may not feel it but hear the sound change.

It could also be a setting within SH. I know there's a setting for how to report leak. Someone else will have to chime in about that.


RE: Where's the leak??? - Jeffo1 - 08-21-2017

Thanks. I just installed a brand new hose and mask on Friday but I will methodically go through everything to see if there's a possible leak.

Curioisly, even though my AHI reading on my Bi Pap machine was 2.0, I'm still feeling tired. Could this be a result of a 37% large leak, as listed in the machine data?

Jeffo1


RE: Where's the leak??? - PaulaO2 - 08-21-2017

During a large leak, the machine cannot compensate for the lost pressure. Since it uses pulses to determine if the airway is open or closed, it can't really tell. So it can't react to an event because it may not know one is happening.

So, yeah, your AHI could be higher than reported.