"Tube setting" on Aircurve VAuto? - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: "Tube setting" on Aircurve VAuto? (/Thread-Tube-setting-on-Aircurve-VAuto) |
"Tube setting" on Aircurve VAuto? - bluemom51 - 02-13-2018 I did try to search, but couldn't quite find the answer. I just exchanged my Bipap for a different one to see if it solved the humidity mess problem. When I was copying the settings before I turned the old one in, I saw a section where it was set to "Slimline" and there was a "Standard" and one other choice. I use a Climateline heated hose - when you plug this in, does it automatically override the "tube settings"? Because it is definitely not a slimline hose. Thanks for any information! RE: "Tube setting" on Aircurve VAuto? - Walla Walla - 02-13-2018 Yes it sets automatically. RE: "Tube setting" on Aircurve VAuto? - SarcasticDave94 - 02-13-2018 Correct, once the hose is plugged in, the machine locks in ClimateLine Heated Hose. RE: "Tube setting" on Aircurve VAuto? - bluemom51 - 02-13-2018 That's what I thought, but just wanted to check - thanks so much! I hope by some miracle the humidity on this new machine works a little better. I even set up a room humidifier and got the humidity near 40, and on the previous one, it still emptied 2 bins in 8 hours and there seemed to be no humidity at all - nose dry and closed down and hard to breathe. Auto never worked, and Manual 7-8 produced pretty much zero humidity to my nose. Ugh - this machine has 5% more humidity built into it and can't produce 1/10 of what the S9 Auto did...... Well, I'm hoping for a better night tonight - there's always a chance, right? RE: "Tube setting" on Aircurve VAuto? - SarcasticDave94 - 02-13-2018 You're welcome and best wishes on therapy success. RE: "Tube setting" on Aircurve VAuto? - trish6hundred - 02-14-2018 Hi bluemom51, I hope the new machine works out better for you. |