+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Missing Sleepyhead data (/Thread-Missing-Sleepyhead-data--21089)
Pages:
1
2
Missing Sleepyhead data - booksfan - 02-23-2018
A couple of nights this week, Sleepyhead has not recorded my apneas and hyponeas, giving me an AHI of 0. They DO show up in MyAir, so I know they are happening. Sleepyhead is recording my pressure, flow limiitation, leak rate, etc. Last night, I unplugged and plugged back in my CPAP machine and did get an accurate reading. Does anyone have any ideas/suggestions as to what might be going on?
I'm attaching two days data, one with missing information and one correct.
[attachment=4565]
[attachment=4566]
RE: Missing Sleepyhead data - Walla Walla - 02-23-2018
Make sure all your event flags are turned to green.
RE: Missing Sleepyhead data - booksfan - 02-23-2018
(02-23-2018, 08:45 PM)Walla Walla Wrote: Make sure all your event flags are turned to green.
Um...I'm sorry, how do I turn my event flags green? I don't understand.
RE: Missing Sleepyhead data - Crimson Nape - 02-23-2018
Look at the lower left of the Daily Screen. You will see a drop down box labeled,"Flags". Make sure all the bars are green for all the parameters.
RE: Missing Sleepyhead data - Apnea Infant - 02-24-2018
So what readings was MyAir giving for Feb 20 when sleepy head recorded zero?
RE: Missing Sleepyhead data - booksfan - 02-24-2018
(02-23-2018, 09:33 PM)Crimson Nape Wrote: Look at the lower left of the Daily Screen. You will see a drop down box labeled,"Flags". Make sure all the bars are green for all the parameters.
Thank you! All bars are green!
RE: Missing Sleepyhead data - booksfan - 02-24-2018
(02-24-2018, 09:27 AM)Apnea Infant Wrote: So what readings was MyAir giving for Feb 20 when sleepy head recorded zero?
That night MyAir reported 2.3 events per hour.
RE: Missing Sleepyhead data - Apnea Infant - 02-24-2018
Don't see how all flags being green will highlight events when there are none. And also if some flags are red that this will hide any events if they exist?
AHI reports whether or not flags are green. You can get to AHI reports on the left hand side under 'events'. I think it may be the case that you actually did not have any events on Feb 20. If you click 'Events' which is the next column on the left hand side and next to details you can see all your events listed and the times in seconds they occur. If under every event-of Clear airway, Hypopnea, Large leak, Obstructive there are zero then you did not have any events that night.
RE: Missing Sleepyhead data - booksfan - 02-24-2018
This is my data from last night. This time my pressure, leak rate, and flow limitation are missing! All event flags are green.
[attachment=4573]
I've also noticed an odd flow rate the last two nights. Last night it occurred around 5:30. The previous night, it was about 3:45-4:20, so it last quite a bit longer. I don't know if this is helpful at all, but here is a screenshot from before it happens, around 5am:
[attachment=4574]
and here is a screenshot from the middle of the odd flow rate, around 5:30 am:
[attachment=4575]
Any ideas?
RE: Missing Sleepyhead data - jaswilliams - 02-24-2018
Maybe your machine if having issues writing to the sd card. All of your data is backed up in sleepyhead, so format the SD card in your pc as fat 32 make sure it is back in the machine and it should write the summary info back onto the card. Try again tonight