Apnea Board Forum - CPAP | Sleep Apnea
Sleepyhead software - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum)
+--- Thread: Sleepyhead software (/Thread-Sleepyhead-software--21838)



Sleepyhead software - Kskating - 04-29-2018

I've got a AirSense 10 and would love to use Sleepyhead but it only loads the basics that I can already see on myAir. What do I need to do to get all the graphics?  I'm on a mac and do I need a specific SD card?


RE: Sleepyhead software - OpalRose - 04-29-2018

Hi Kskating,
Can you be more specific as to which machine you have?

If it is the Airsense 10 Elite, then it would be data capable and should work with #SleepyHead.

If you have the Airsense 10 CPAP, then that machine is not data capable and you will not be able to get any usefull data from it.


RE: Sleepyhead software - Kskating - 04-29-2018

AirSense 10 Autoset For Her


RE: Sleepyhead software - jaswilliams - 04-29-2018

(04-29-2018, 03:21 PM)Kskating Wrote: AirSense 10 Autoset For Her

Make sure you leave the SD card in the machine when your using it and the card is unlocked. It should then write the detailed information to the card.


RE: Sleepyhead software - MitchS - 04-29-2018

Enter the Clinician’s menu, go to Settings>Options and set Essentials to Plus, if it isn’t already.


RE: Sleepyhead software - Kskating - 04-29-2018

The clinicians menu of the cpap?  Not sure I can do that.


RE: Sleepyhead software - OpalRose - 04-29-2018

(04-29-2018, 08:21 PM)Kskating Wrote: The clinicians menu of the cpap?  Not sure I can do that.

Sure you can.  Press and hold the dial and home button for about 3 seconds.  

In the meantime, order the Clinicians manual here:
https://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual


RE: Sleepyhead software - Kskating - 04-29-2018

I did it!  And was already set for Plus so I have put the SD card in and I will see what happens tomorrow. Thank you all so much.


RE: Sleepyhead software - Sleeprider - 04-29-2018

For some reason, I have seen where the first night of use is not always fully recorded. I'm sure your information will be fine tomorrow.