+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [CPAP] Power Supply (/Thread-CPAP-Power-Supply)
Power Supply - bricki - 05-17-2018
Hi everyone this is my first post. I'm thinking of buying a Resmed Airsense 10 from USA. What i would like to know is, will it work on our 240 volts with out any transformer as the USA is 110 Volts, also how will i get around that american power cord, do i have to buy some adapter or can i get a new power cord hear from Jaycar.
Regards Tony
RE: Power Supply - DeepBreathing - 05-17-2018
G'day Tony. The power brick is rated for 100 - 240 VAC so it will work fine as is. The cord is different, but the easiest way is just to use an Australian 2-pin cord which you can get from Jaycar. Easiest way to make sure you have the right one is to take the one that comes with your machine for comparison.
RE: Power Supply - retlif - 05-17-2018
The CPAP's power brick will take care of the conversion. There is no need to buy a separate transformer.
RE: Power Supply - gwc2795 - 05-17-2018
RE: Power Supply - bricki - 05-17-2018
Thank's for the reply, i will go to jaycar
RE: Power Supply - Sleep2Snore - 05-17-2018
Short answer: Yes it will but the plug will be a USA type.
Get a good travel adaptor rated at least 5amps or more.