+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Z1 display question (/Thread-Z1-display-question)
Z1 display question - ShoshTrvls - 07-28-2018
According the the user manual for my Z1 Auto, a section of the display is supposed to cycle through three pieces of info - Bluetooth status, date, and machine setting (CPAP or APAP and the comfort setting). My machine has a fourth item in the rotation and for the life of me I have no idea what it means. I’m attaching a photo and would appreciate any help on this.
Thanks.
Shosh
RE: Z1 display question - Walla Walla - 07-28-2018
This is from the user guide:
General Status Display
In Standby Mode, this display field alternates between a display of the current date, the current
function mode and the Z-Breathe setting. During treatment and while setting treatment
parameters, this display field shows the currently selected function mode (CPAP) and Z-Breathe
setting (1, 2 or 3). The General Status Display field may also give notification of certain events
which will NOT prevent prevent the Z1 from operating normally but may need to be addressed
by the user.
RE: Z1 display question - ShoshTrvls - 07-28-2018
(07-28-2018, 11:32 AM)Walla Walla Wrote: This is from the user guide:
General Status Display
In Standby Mode, this display field alternates between a display of the current date, the current
function mode and the Z-Breathe setting. During treatment and while setting treatment
parameters, this display field shows the currently selected function mode (CPAP) and Z-Breathe
setting (1, 2 or 3). The General Status Display field may also give notification of certain events
which will NOT prevent prevent the Z1 from operating normally but may need to be addressed
by the user.
Right. So this is in standby mode, and that readout is not the date, the setting, or the Bluetooth status (all of which also cycle through that part of the display).
And having done nothing since that picture was taken, that readout now says 0-36-P. It has also said 0-0-P, and a variety of other things. (I’m just now beginning to realize that it might be a 24 hr clock, off by 12 hours - may have solved my own issue)
It’s a mystery!