+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Traveling with ResMed Airsense 10 Power Supply (/Thread-Traveling-with-ResMed-Airsense-10-Power-Supply)
Traveling with ResMed Airsense 10 Power Supply - DrAHI - 01-12-2019
Hello everybody,
I have received my brand new ResMed Airsense 10 Auto, with a power supply made for North America. The power cord has two symmetrical prongs with 7A / 125 V.
For work reasons I sometimes visit other countries, especially Europe, where the regular power tension is 220V.
Should I get a new power unit for the APAP, or can I just change the power cord (that is, the piece that attaches to the power unit and a wall socket)?
Thank you!
RE: Traveling with ResMed Airsense 10 Power Supply - jaswilliams - 01-12-2019
The power adapter is dual voltage and will work fine for 110v or 240v all you need is suitable adapter to convert the North American connector to the appropriate power connector no power transformation needed so they are only a few dollars either in the airport or from amazon. When travelling I use an extension lead with two power shockers on it plug the appropriate adapter on one end as in some hotels the power is far away from the bed I can then plug my phone in to charge and my machine. The extension lead fits in my cpap bag with no issue. I am in The UK and travel the other way but it’s both the same as I imported one of my resmed autosets from the US no need for a specific power cord as the plug changes depending where in Europe you go.
RE: Traveling with ResMed Airsense 10 Power Supply - srlevine1 - 01-12-2019
(01-12-2019, 01:26 AM)DrAHI Wrote: Hello everybody,
I have received my brand new ResMed Airsense 10 Auto, with a power supply made for North America. The power cord has two symmetrical prongs with 7A / 125 V.
For work reasons I sometimes visit other countries, especially Europe, where the regular power tension is 220V.
Should I get a new power unit for the APAP, or can I just change the power cord (that is, the piece that attaches to the power unit and a wall socket)?
Thank you!
According to ResMed, their power supply accepts "World Wide Input Voltage 100-240VAC 50/60Hz OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection." I also know it accepts 400-Hz 110 aircraft voltage. Therefore you would need an adapter plug from the American standard 110 AC plug to the unique plug at your destination. Always confirm the power specifications on your power supply. Just make sure that your destination power is not DC (rare).
90W power supply unit
AC input range:
100–240V, 50–60Hz 1.0–1.5A, Class II 115V, 400Hz 1.5A, Class II (nominal for aircraft use)
DC output:
24V 3.75A
Typical power consumption:
53W (57VA)
Peak power consumption:
104W (108VA)
RE: Traveling with ResMed Airsense 10 Power Supply - PaulaO2 - 01-12-2019
Yeah, you can get the adapter at any luggage store, general goods store (walmart, kmart, best buy), etc.
RE: Traveling with ResMed Airsense 10 Power Supply - mesenteria - 01-12-2019
...and with a probability of approx. 96%, the commercial lodging at which you will stay will be able to provide their intrepid guests from afar with adapters of all kinds.
RE: Traveling with ResMed Airsense 10 Power Supply - DarciWantsToSleep - 01-12-2019
Hi there.
I just received my ResMed Autosense 10 too and will be traveling to Southeast Asia in a few weeks. The DME said all I needed was the converter plug. I have a 7 in one from Amazon that also has USB ports for charging my phone. I did also buy the matching battery pack in case the plug at my seat on the plane isn't working. But I also have a 17.5 hour flight.
Best,
Darci
RE: Traveling with ResMed Airsense 10 Power Supply - Stom - 01-12-2019
(01-12-2019, 01:51 PM)DarciWantsToSleep Wrote: Hi there.
I just received my ResMed Autosense 10 too and will be traveling to Southeast Asia in a few weeks. The DME said all I needed was the converter plug. I have a 7 in one from Amazon that also has USB ports for charging my phone. I did also buy the matching battery pack in case the plug at my seat on the plane isn't working. But I also have a 17.5 hour flight.
Best,
Darci
Beware of the multi adapters. They can expose you to live current.
http://www.youtube.com/watch?v=hvOTiQKkQMo
RE: Traveling with ResMed Airsense 10 Power Supply - srlevine1 - 01-13-2019
Beware of the multi adapters. They can expose you to live current.
http://www.youtube.com/watch?v=hvOTiQKkQMo
Many thanks for the safety video ... and unexpectedly, the video author who has a number of interesting and technical videos. -- steve
RE: Traveling with ResMed Airsense 10 Power Supply - Hamguy515 - 01-13-2019
If you know the outlet standard where you're going, why not just pick up an extra power input cord for the machine to use in place of the US-style cord?
Search for something like "C7 Euro power cord" and it might give you some other options.
Having used adapters in the past while living in South Africa for a couple of years, I much prefer the option of swapping power input cords when possible.
Anyway, just something to think about.
RE: Traveling with ResMed Airsense 10 Power Supply - jaswilliams - 01-13-2019
(01-13-2019, 08:41 AM)Hamguy515 Wrote: If you know the outlet standard where you're going, why not just pick up an extra power input cord for the machine to use in place of the US-style cord?
Search for something like "C7 Euro power cord" and it might give you some other options.
Having used adapters in the past while living in South Africa for a couple of years, I much prefer the option of swapping power input cords when possible.
Anyway, just something to think about.
For me it depends on the duration. For a week or two just use the correct plug adapter beyond that eg on my us imported machine that I use in the UK full time change the cable