Bipap System 1 question - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: Bipap System 1 question (/Thread-Bipap-System-1-question)

Bipap System 1 question - E.W. - 06-17-2019 I would like to use this just as an apap. I got in the clinical menu and  set it to auto oh so far. I would prefer not using any pressure support and did see how to dial it down to 3 but is there any way to turn it all the way off? RE: Bipap System 1 question - Gideon - 06-17-2019 To not have any Pressure Support you would Turn Flex Off and reduce min pressure by 2. BUT, I don't think that is what you mean. Exactly what are you trying to do? I strongly suggest post daily charts from SleepyHead as that will help us to help you. RE: Bipap System 1 question - Sleeprider - 06-17-2019 E.W. if you have a System One BiPAP Pro or Auto, you can set it to CPAP mode, or set the EPAP equal to IPAP. In Auto mode, you can select PS min 0 and PS Max 0, and set the minimum and maximum EPAP and maximum pressure. It would help to know what you're dealing with. The clinical manual for the PRS1 BiPAP is available from the Setup Manuals link at the top of the page. RE: Bipap System 1 question - E.W. - 06-17-2019 Thanks I will download the manual .