Apnea Board Forum - CPAP | Sleep Apnea
clearing s9 memory - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: clearing s9 memory (/Thread-clearing-s9-memory)



clearing s9 memory - herefishy - 02-05-2013

I bought a used autoset and coincidentally the first user started with Feb 2 of 2012, so our stats kind of overlap - is there any way to clear that first users data out?


RE: clearing s9 memory - zonk - 02-05-2013

Hi herefishy
you need to go to the clinical menu (Configuration) to erase the data
allows you to erase all data stored
machine hours cannot be erased

the manual is available via email (scroll down to section three)
http://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual

S9 setup information and video
http://www.apneaboard.com/resmed-s9-cpap-setup




RE: clearing s9 memory - PaulaO2 - 02-05-2013

Yes, in the clinician menu under configuration. It will erase all but the total hours used (machine hours). If that is important to you, then just write the hours on a sticker and put on bottom of machine.

Do you have the clinician manual? You should get it if you don't.
http://www.apneaboard.com/forums/Forum-Private-Files-and-Links

Hold the silver button that has the two checkmarks on it while also holding down the knob. Let go when the screen changes to the clinician menu.
Turn knob to select the "Configurations" menu.
Tap knob (screen turns orange I think)
Turn knob to select "Erase data".

I would assume you then tap the knob again. Not sure what the screens say after that.


RE: clearing s9 memory - herefishy - 02-05-2013

Got it - thanks! Now to see MY data tomorrow.


RE: clearing s9 memory - zonk - 02-05-2013

(02-05-2013, 03:03 PM)zonk Wrote: machine hours cannot be erased
run hours is not reset when data is erased






RE: clearing s9 memory - Ugly - 02-06-2013

(02-05-2013, 03:03 PM)zonk Wrote: machine hours cannot be erased

You know that's not true. If the hours can be written they can be erased. However, one probably has to know enough about the inner circuitry to reset it properly. That's way out of my realm.



RE: clearing s9 memory - TorontoCPAPguy - 02-11-2013

So, how do we do a full reset? I am thining that my S9 Autoset is not blowing what it should be blowing; the pressure appears to be lower than indicated. I compare it to my spare set to the same pressure and the spare appears to be blowing a LOT more pressure than the S9 Autoset. I'd like to do a full hard reset. Next I'd like to source a manometer and actually measure the pressures. Anyone have a manometer they'd like to sell?



RE: clearing s9 memory - zonk - 02-11-2013

(02-11-2013, 12:20 AM)TorontoCPAPguy Wrote: Anyone have a manometer they'd like to sell?
Home-made "Manometer" for few dollars
http://www.apneaboard.com/forums/Thread-Home-made-Manometer-for-few-dollars

Supplier #2 have one for $35 include shipping
http://www.apneaboard.com/forums/Thread-CPAP-Supplier-List