Apex Auto PVA doesn’t last... - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: Apex Auto PVA doesn’t last... (/Thread-Apex-Auto-PVA-doesn%E2%80%99t-last) |
Apex Auto PVA doesn’t last... - HeathClose - 09-18-2019 i have an apex auto and the PVA only lasts about 3 minutes. Is this normal? My last CPAP had that but it was a permanent relief all night... Is there a setting I’m not aware of that makes it last longer (or through the night)? RE: Apex Auto PVA doesn’t last... - OpalRose - 09-19-2019 Hi HealthClose, I’m not familiar with your machine, but you most likely can get directions for those settings in the Clinicians ManuL Order it at this link: https://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual Scroll down to Section Three, under Other Manuals. RE: Apex Auto PVA doesn’t last... - Lord Maximus - 10-25-2019 Hello, Sorry for this late reply. My Apex lasts all night; there is a section here where you can change the PVA funtion so it does work all night; I have mine set for that and it responds well to changes in pressure. My machine appears to breathe on its own if a leave it running from the start.... There may be an issue with your machine..if fairly new, then contact manufacturer. LM RE: Apex Auto PVA doesn’t last... - HeathClose - 10-25-2019 (10-25-2019, 07:45 AM)Lord Maximus Wrote: Hello, You say there is a section where you can control the time the PVA works? I have the clinicians setup manual, but I don’t see that anywhere, just the pressure choices and whether it’s on or not... RE: Apex Auto PVA doesn’t last... - Lord Maximus - 10-25-2019 I do not have the manual in front of me but I remember that it said something like either 0 or 3 to set up the PVA... maybe ....other numbers, but like I said there may be an issue with your machine.. RE: Apex Auto PVA doesn’t last... - HeathClose - 10-25-2019 Yah the numbers are pressure relief amount. I tried to contact the manufacturer and they never got back to me... any idea on how to contact them? |