[Equipment] help getting compliance numbers - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: [Equipment] help getting compliance numbers (/Thread-Equipment-help-getting-compliance-numbers) |
help getting compliance numbers - jlawyer - 02-19-2013 i need help on how to get my compliance numbers of my machine,its an escape 2 what do i need to get this information,can i do it on my computer or do i need to take it to lincare and have them do it.any help would be much appreciated RE: help getting compliance numbers - trish6hundred - 02-19-2013 Hi jlawyer, WELCOME! to the forum.! Hang in there and someone will be able to help you with your question soon Best of luck. RE: help getting compliance numbers - zonk - 02-19-2013 (02-19-2013, 03:36 PM)jlawyer Wrote: i need help on how to get my compliance numbers of my machine,its an escape 2 what do i need to get this information,can i do it on my computer or do i need to take it to lincare and have them do it.any help would be much appreciatedthe escape is Resmed machine. which escape machine is it? S8, S9 when you insert card in machine, the machine write compliance data on the card you can send the card to whoever need the information the escape models are low end machines. no efficacy data, just how many hours using the machine each night you might want to read this http://maskarrayed.wordpress.com/dont-pay-that-upcharge/ RE: help getting compliance numbers - jlawyer - 02-19-2013 i believe it is the s8 model got it through lincare,in the back of machine is a green board looks like it may have plug that fits over it,was wondering what i need to hook it to my computer and get the hours i use it off there RE: help getting compliance numbers - zonk - 02-19-2013 (02-19-2013, 06:03 PM)jlawyer Wrote: i believe it is the s8 model got it through lincare,in the back of machine is a green board looks like it may have plug that fits over it,was wondering what i need to hook it to my computer and get the hours i use it off therethe S8 require special card reader and best place to obtain the card reader thru ebay from Israel I don,t know enough about your insurance but do you self a favor and read the link in first post and get the Escape replace with an S9 Autoset or S9 Elite (you don,t want S9 Escape or S9 Escape Auto) without efficacy data, not you nor your doctor on the followup would know how your therapy is working RE: help getting compliance numbers - jlawyer - 02-19-2013 thank you RE: help getting compliance numbers - PaulaO2 - 02-20-2013 Are you asking how to view the hours yourself? If so, then the S8 requires a special card and a special card reader and hard to find. There is a cable to connect it to a computer but they are impossible to find. If Lincare just gave this to you recently, take it the heck back. It's an outdated machine by many years. If it is one you have had for a while, and if you have insurance, most of them will replace it after 5-6 yrs. Ask for one that is data capable. Here's an article on that: http://www.apneaboard.com/wiki/index.php?title=Archangle:Machine_Choices However, if you are asking how to change the compliance hours in order to be compliant and get insurance to pay, we don't do that here. That is very illegal and something we do not condone. |