Zero AHI+no graph in Sleepyhead - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: Zero AHI+no graph in Sleepyhead (/Thread-Zero-AHI-no-graph-in-Sleepyhead) |
Zero AHI+no graph in Sleepyhead - VegasPier - 02-19-2013 I have been using a ResMed S9 since January 14. My AHI readings have been averaging 0.56 for the past 7 days. Last two days the daily average has been zero. I like that number and am not complaining. However I am curious why there is not a graph for those zero nights. Is that normal? Cheers, Vegaspier RE: Zero AHI+no graph in Sleepyhead - zonk - 02-19-2013 I don,t use SH an apnea is scored when there is reduction in breathing for at least 10 seconds less than 10 seconds are not scored/shown on the graph (AHI reset each hour) but can be picked up if you zoom on the flow graph flow limitation is partial upper airways obstructions, on Resscan shown by mountain shape. the flatter shape the worst is the obstruction RE: Zero AHI+no graph in Sleepyhead - Sleepster - 02-19-2013 (02-19-2013, 05:31 PM)VegasPier Wrote: However I am curious why there is not a graph for those zero nights. Is that normal? No, it's not normal. There should be graphs, leak data, and so forth even if there were no events and a zero AHI. RE: Zero AHI+no graph in Sleepyhead - PaulaO2 - 02-20-2013 Remove the card from the machine. Unplug the machine from the wall. Wait a minute. Plug back in. Put the card back in. Wait a minute or so. Then take out the card and see if it now has data. It will have incomplete data but there will be some like AHI and flow rate. S9s have a habit of doing all zeros. |