+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Help setting up Respironics Bipap AutoSV Advanced System One (/Thread-Help-setting-up-Respironics-Bipap-AutoSV-Advanced-System-One)
Pages:
1
2
Help setting up Respironics Bipap AutoSV Advanced System One - SorryIamNormal - 12-11-2019
I bought one on Ebay managing to be quicker than the algothirm. It has 8k blower hours and I paid 400 w/ humidifier. I hope this is a good deal. Anyhow I can't get it to stop. One my System One Apap I press down on Therapy and when I take the mask off down again and it stops. This one continues to blow pressure, when I disconnect the mains power it keeps beeping and the alarm button lights up.
I can get into the setup menu but I couldn't figure out how to turn this behaviour off. It came with a wireless module that I removed. As I don't want the cellphone radiation that close to my body.
RE: Help setting up Respironics Bipap AutoSV Advanced System One - SorryIamNormal - 12-11-2019
I have a picture of the machine and the wireless module but can't post it due to being a new member.
RE: Help setting up Respironics Bipap AutoSV Advanced System One - Sleeprider - 12-11-2019
Links are limited for new members, but attachments are not. As long as the image is less than 1-MB you can use the attachment feature to show the image. The BiPAP Auto SV has multiple generations, so this could be a M-Series, System One 50 or 60 series or a Dreamstation. Kowing what you are working with and the settings makes a difference.
Your membership level will promote with your next 4th post, so don't be discouraged. Also, be sure to ask for the setup manual for your machine. https://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual
RE: Help setting up Respironics Bipap AutoSV Advanced System One - SorryIamNormal - 12-11-2019
Attachments added.
RE: Help setting up Respironics Bipap AutoSV Advanced System One - Sleeprider - 12-11-2019
You have a Philips Respironics System One 60 Series BiPAP Auto SV Advanced DS960H. There are minimal changes in the newer Dreamstation series. You can access the setup menu by scrolling the menu to Setup, then holding down the control knob and ramp button at the same time. You should check that the Auto On feature is ON. Also be sure the Patient Disconnect and Apnea Alarms are OFF. The control knob should work to start and stop therapy as with your other machine.
What therapy settings are you using? Your profile indicates you are using OSCAR. If you have any therapy charts, they will include settings that may help us to know how your machine is setup and if there are any opportunities to optimize. If you are interested, there is a reasonably priced kit to upgrade the lid, power supply and tube to provide a heated tube.
RE: Help setting up Respironics Bipap AutoSV Advanced System One - SorryIamNormal - 12-11-2019
I've got the heated tube on my respironics sys one autopap. I'm prescribed 14. The last sleep dr I saw in 2016 told me to set the auto to 12-20. Of course since the machine 'doesn't see anything wrong' the pressure stays at 12 all night.
RE: Help setting up Respironics Bipap AutoSV Advanced System One - SorryIamNormal - 12-11-2019
(12-11-2019, 08:20 PM)Sleeprider Wrote: You should check that the Auto On feature is ON. Also be sure the Patient Disconnect and Apnea Alarms are OFF.
Patient disconnect alarm and apnea alarm don't have a on/off setting only 0-60. I will try zero. I set auto on to ON and I set the alarm values to 0. The machine still will not stop blowing air. It blows air at the main therapy/biflex/info/setup screen. I can take a video and upload that if it would help.
OK it appears I have to HOLD DOWN on the main knob for it turn off. It did turn off this time. Weird.
RE: Help setting up Respironics Bipap AutoSV Advanced System One - Sleeprider - 12-11-2019
On the Auto SV, what mode and pressure are you using? This is not a simple BiPAP but has a CPAP mode. It is usually used for treating central and complex apnea. What led you to purchase an adaptive servo ventilator?
RE: Help setting up Respironics Bipap AutoSV Advanced System One - SorryIamNormal - 12-11-2019
I haven't had bipap titration and bought it because I'm desperate and I can not put my entire life on hold until jan 15th for my next sleep dr appointment. Who will most likely tell me 'everything is fine' (hint it isn't). Attached is the face of a very well rested human /s.
RE: Help setting up Respironics Bipap AutoSV Advanced System One - jaswilliams - 12-12-2019
A Dreamstation has both auto off and auto on make sure both are set to on for it to turn off auto magically