+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Weinmann/Lowenstein Prisma Smart how to change CPAP / APAP (/Thread-Weinmann-Lowenstein-Prisma-Smart-how-to-change-CPAP-APAP)
Weinmann/Lowenstein Prisma Smart how to change CPAP / APAP - Karpina - 12-24-2019
Hello,
How can i change hidden settings in PRISMA SMART, i want to turn on APAP mode.
Model WM 090 TD.
RE: Weinmann/Lowenstein Prisma Smart how to change CPAP / APAP - DeepBreathing - 12-24-2019
G'day Karpina. Welcome to Apnea Board.
I'm not familiar with the various Prisma models, but we do have instructions for some Weinmann machines in our clinician manuals section here: https://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual
One of these should do the trick:
- Weinmann SOMNOsoft+: Press the ramp-button until "Soft" can be seen in the Display. While still pressing the ramp-button press the humidifier button, until the pressure-setting-menu appears.
- Weinmann SOMNOcomfort 2: Press the ramp-button until the display is clear (or 'A' is blinking if Automatic Mode is enabled). While still pressing the ramp-button press the humidifier button, until the pressure-setting-menu appears.
- Weinmann Prisma series with buttons: When in clock mode, press and hold the rightmost buttons (menu and ramp) for a few seconds until MENU CLIN appears. Then press the + (settings) button.
- Weinmann Prisma series with touch screen: Press and hold the "info" icon for a few seconds, then choose "login" to enter setup.
You can also request a PDF copy of the Weinmann SOMNObalance (e) autoCPAP & SOMNOsoft 2 (e) CPAP (combined manual) at the same link.
RE: Weinmann/Lowenstein Prisma Smart how to change CPAP / APAP - Camera Obscura - 12-30-2020
You do not even need to go into the clinical parameters.
You can do it from the user menu.