+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum)
+--- Thread: Need help with Rescan and Resmed Oximeter (/Thread-Need-help-with-Rescan-and-Resmed-Oximeter)
Need help with Rescan and Resmed Oximeter - mdmarmd - 02-19-2020
I need a crash course in using Rescan with the Resmed Oximeter. I wanted to see what the O2 does when my AirFit P10 vents obstruct and the CO2 increases precipitously. I couldn't do it last spring because my two Contec CMS50i no longer worked.
I just saw my sleep tech to try the newer full face masks. He loaned me a ResMed oximeter but only for a few days so I don't have much time to study how to use this. The O2 seems to show up in the OSCAR software but I can't find it in the ResScan software. I wonder if there is some menu or setting that I need to change in order for the O2 to show up. The tech wanted me to send the data using ReScan so that's why I'd like to get this working.
If anyone knows what I need to do, I'd appreciate the help.
Doug
RE: Need help with Rescan and Resmed Oximeter - DeepBreathing - 02-19-2020
Doug, I don't have an oximeter so to some extent I'm just guessing here, so take it for what it's worth.
According to the ResScan help files the oximeter data should show up in both the oximeter statistics tab and the detailed graphs. In the graphs you probably need to turn the traces on using the configuration window. Access this from the tiny symbol at the top of the chart (see attached). You'll need to turn the traces on and possibly also change the setting for the number of graphs visible (maximum is 8). If you have more than 8 you will need to turn something else off.
Hope this helps - please let us know if I'm on the right track.
[attachment=20168]
RE: Need help with Rescan and Resmed Oximeter - mdmarmd - 02-20-2020
Thanks for the Advice. I tried to use the Graphing Options that you suggested but even though I have it set to show eight options it only shows four: Usage/Total Usage/AHI AI/Leaks/Pressure. I can't seem to show any more parameters.
I went into the Report/Customize Tabs and there is a whole list of parameters that you seem to be able to add or remove parameters to the Detailed Graphs, Summary Graphs or Oximetry Statistics. But no matter what I add or remove I still only can see the four parmeters listed above.
So there must be something else that's not set up correctly. As I mentioned, the O2 did show up on OSCAR and the AirSense 10 panel shows the SPO2 and HR at the bottom of the menu screen when its running. So it seems the oximeter is connected and recording, but just can't port it to the ReScan software.
Still need help on this.
RE: Need help with Rescan and Resmed Oximeter - Jeff8356 - 02-20-2020
Is any of the Oximetry data showing up in the Oximetry Statistics tab?
[attachment=20161]
RE: Need help with Rescan and Resmed Oximeter - mdmarmd - 02-20-2020
Oximetry doesn't show up anywhere. It's funny because in the Report tab there is a Customize Report tab. When you click on it it shows two collums where you are supposed to be able to add or remove a long list of parameters to each of the detailed graphs and summary graphs but it seems to have no effect what so ever and I still only get the 4 basic parameters no matter what I add. I shows O2 and HR as options, but no go.
RE: Need help with Rescan and Resmed Oximeter - Jeff8356 - 02-20-2020
Just a thought.... What version of ResScan are you using?
The S9 and S10 have different oximetry modules. If it's an older version of ResScan it may not be recognizing the S10 module.
The last version of ResScan I downloaded is 6.0.2.13
RE: Need help with Rescan and Resmed Oximeter - mdmarmd - 02-20-2020
That's the version I'm using
RE: Need help with Rescan and Resmed Oximeter - Jeff8356 - 02-21-2020
Any chance of posting a screen shot of ResScan showing your Detailed Graphs tab? Including the panes on the left showing the dates...