+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: advice/comments central apnea (/Thread-advice-comments-central-apnea)
Pages:
1
2
advice/comments central apnea - pugster - 03-04-2020
Hi all , first off a bit of background - i was diagnosed with severe sleep apnea (complex ) last year (52 per hr) and given a cpap to to try (after using for multiple nights this did nothing for me ) , was then given a bipap machine (again no / little improvement ) , a few weeks ago after seeing the consultant again (UK based NHS) i was given a resmed s9 autoset ASV to try as most of my events are centrals , this machine is a lot better to tolerate but i still keep waking up a lot gasping for air (sometime pulling the mask off) - does anyone have any ideas about what is going on and what needs to be done with the ASV ?
when i had the sleep study done they said i also have a lot of movement going on but this has not been addressed by the consultant (im assuming he thinks the apneas are waking me up and not the movement and correcting this will solve the other)
i have attached a screenshot and zoomed in on a few of the central events , if i need to post anymore/different screenshots to help ppl please let me know - and thanks for any advice anyone can give
RE: advice/comments central apnea - DeepBreathing - 03-04-2020
G'day Pugster.
Are you sure you have an ASV? That's not what your Oscar screenshot is showing. You appear to have an ordinary Autoset which will not treat central apnea. What is printed on the machine near the power button?
RE: advice/comments central apnea - pugster - 03-04-2020
Hi , i was told this is an ASV by the nurse (they said it was a 'test' machine and if it helped a new machine would be ordered for me) , it simply has 'autoset' above the power button and 'EPR' underneath it.
RE: advice/comments central apnea - Crimson Nape - 03-04-2020
Please look at this image. It should say AirCurve.
![[Image: ResMed-AirCurve-10.png]](https://www.apneaboard.com/ResMed-AirCurve-10.png)
RE: advice/comments central apnea - slowriter - 03-04-2020
Seems maybe the nurse made a mistake.
RE: advice/comments central apnea - pugster - 03-04-2020
this is the model im using (it is supposed to have CSA detection and compensation) - if you zoom in you can see it just says 'autoset'
* ive just been on the phone to the sleep clinic and as ppl have stated this is not an ASV ( even though it has some sort of CSA software) - im going in tomorrow to pick up the correct model.
many thanks for pointing out this is not a true ASV - as i would not have known myself
-----
Moderator Action: Link Removed, search for Resmed S9 Autoset machine bundle at TheCPAPshop
Moderator Action: Link Removed, search for Resmed S9 Autoset machine bundle at TheCPAPshop
To maintain our status as an educational organization, certain types of commercial links are prohibited in this forum. This is stated in the Apnea Board Rules with details given in the Commercial Links Policy section.
-----
[/code]
RE: advice/comments central apnea - SarcasticDave94 - 03-04-2020
An Autoset is not an ASV and it will not address the central apnea. Tell them you need a machine that says ASV.
RE: advice/comments central apnea - Sleeprider - 03-04-2020
It appears you are currently using a Resmed S9 Autoset. The S9 Autoset has the capability to determine if an apnea is central or obstructive using the forced oscillation technique (FOT). I assume you hope to pick up a Resmed Aircurve 10 ASV from your sleep clinic. The ASV (adaptive servo ventilator) is an effective therapy for central and complex apnea. These machines tend to be quite expensive, so be sure you fully understand your financial obligations, and verify the machine is new, before accepting delivery. All Resmed machines track Run Hours which can not be reset. You can ask the clinic to show you the run hours, or plug the machine in and enter the clinical settings, and scroll down to the About Menu. This men will show user hours, run hours as well as information about the machine model and firmware. Here is a quick tutorial on how to access the clinical settings https://www.apneaboard.com/resmed-airsense-10-aircurve-10-setup-info
Be sure the machine you are picking up is new, and is the Aircurve 10 ASV.
RE: advice/comments central apnea - 70sSanO - 03-04-2020
(03-04-2020, 09:38 AM)pugster Wrote: this is the model im using (it is supposed to have CSA detection and compensation) - if you zoom in you can see it just says 'autoset'
* ive just been on the phone to the sleep clinic and as ppl have stated this is not an ASV ( even though it has some sort of CSA software) - im going in tomorrow to pick up the correct model.
many thanks for pointing out this is not a true ASV - as i would not have known myself
[/code]
Sleeprider pointed out what the machine is doing to identify the central apneas. But there is a big difference between identifying the problem and fixing it.
What is sad is that all the sleep clinic has to do is look at a Resmed brouchere to see that the Airsense 10 Autoset detects central sleep apnea and the Aircure 10 ASV "treats" central sleep apnea. It's not buried on the last page of a clinician manual.
...and no, Resmed didn't design a "special" Autoset with unique software just for your sleep clinic. Especially an S9 version Autoset; which I also own and didn't work for my central apneas.
John
RE: advice/comments central apnea - dickydutch - 03-04-2020
Hi Sleeprider - I think the OP said he was in the UK on the NHS (and his profile indicates that), so he and I are lucky in that sense there is no cost to us for the machines.