+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [CPAP] Res Med S9 help! Error: Settings reset to default values, please contact service pr (/Thread-CPAP-Res-Med-S9-help-Error-Settings-reset-to-default-values-please-contact-service-pr)
Res Med S9 help! Error: Settings reset to default values, please contact service pr - dexter020281 - 03-07-2013
So I was in denial for a while that I had sleep apneia. Now I am comming to the realzation that I do have it. I have a res med S9 that I pulled from the closet last night. When I went to start her up I get this error.
Error: Settings reset to default values, please contact service provider".
I do not like the place I went to and I would like to just find out how to reset it my self any suggestions? Thanks all for the help!
RE: Res Med S9 help!!! Error: Settings reset to default values, please contact service pr - Shastzi - 03-07-2013
Hi Dexter!
Welcome to the forum.
I think one of the veteran users here will be able to answer your question soon!
Hang in there!
RE: Res Med S9 help!!! Error: Settings reset to default values, please contact service pr - SuperSleeper - 03-07-2013
Hi Dexter, I'm not sure if this is a machine "error message" that means that something went wrong physically with your machine hardware, or it's just that the software settings need to be reset.
If it's simply that the pressures and other settings need to be reset, you can follow the directions on this page:
http://www.apneaboard.com/resmed-s9-cpap-setup
Also, you can go HERE (Section Three) to request the Clinician Setup Manual for your machine, which may help as well with how to set the various settings.
But if it's a physical (hardware malfunction) issue (and not simply some software settings), hopefully others can help out with that. But resetting the software would be the first thing I'd try using the directions on that link.
RE: Res Med S9 help! Error: Settings reset to default values, please contact service pr - dexter020281 - 03-07-2013
When I plug it in it says Error settings reset to default values please contact service provider.
Thanks for the help the manual did not help. I tried everything
RE: Res Med S9 help! Error: Settings reset to default values, please contact service pr - zonk - 03-07-2013
I recall someone posted about this problem in the old forum and also someone else here too
It seem the unit need to be returned to ResMed via supplier, for this problem to be rectified
RE: Res Med S9 help! Error: Settings reset to default values, please contact service pr - archangle - 03-08-2013
Remove the SD card and power off and on with the card still removed from the machine. It probably won't help, but it's worth a try.
RE: Res Med S9 help! Error: Settings reset to default values, please contact service pr - trish6hundred - 03-08-2013
Hi dexter020281,
WELCOME! to the forum.!
Hopefully, you'll be able to get your machine up and running again.
Best of luck.
RE: Res Med S9 help! Error: Settings reset to default values, please contact service pr - dexter020281 - 03-08-2013
Thanks everyone. I am going to try Archangle's Idea when I get home Fingers crossed
RE: Res Med S9 help! Error: Settings reset to default values, please contact service pr - Ugly - 03-08-2013
(03-07-2013, 02:38 PM)dexter020281 Wrote: So I was in denial for a while that I had sleep apneia. Now I am comming to the realzation that I do have it. I have a res med S9 that I pulled from the closet last night. When I went to start her up I get this error.
Error: Settings reset to default values, please contact service provider".
Okay. I would like to think it's an easy remedy but I don't know.
Let me check the clinical guide.
Nuts. No troubleshooting tips.
I will blindly suggest this. MAYBE it will help.
Based on the concept of settings being reset to default values suggests that it has somehow reverted to "like new" condition.
THEREFORE......
Ignore what you see on the screen for a moment. See if you can enter the setup menu, holding down the "push dial" and the "setup menu" button (the lower button with the two check marks).
IF YOU DO get to the setup menu, then try to enter the settings you wish/desire/need/are prescribed/told to use, etc. Then exit the setup screen.
See if that has helped any.
IF, on the other hand, it does not work.... (remember, this is a theory of mine I just made up, untried untested) then you will have to reach out further. Best wishes.
RE: Res Med S9 help! Error: Settings reset to default values, please contact service pr - Shastzi - 03-08-2013
Hmm. I wonder if it was in storage long enough for the little battery to go dead?
According to the "Inside view of S9" there is a CR 2032 button cell battery in a snap mount on the mother board.
Could it have gone dead and allowed the machine to go bonkers?
Just a thought. Probably not worth voiding any warrenties to check on.
