Apnea Board Forum - CPAP | Sleep Apnea
New to CPAP need a bit of help - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: New to CPAP need a bit of help (/Thread-New-to-CPAP-need-a-bit-of-help)

Pages: 1 2 3 4 5 6


New to CPAP need a bit of help - AMD386 - 03-29-2020

hello and thanks for this awsome Board,
i realy dont know i am new to CPAP and i realy hope i have the right maschine for the job or not.
i can see that i have cheyne stoke events and thats makes me worry. i am using the Dreamwear Gelpillow mask
i still think i just worry to much thanks for your help 
Thanks


RE: New to CPAP need a bit of help - MitchS - 03-29-2020

Hello, AMD386. Welcome to the forum. 

I can't help much with your treatment other than to say you will probably need to raise your pressure since it is staying at the max pressure for a good part of the night. Someone else will be along who can better advise you on that. 

I would suggest keeping all treatment related posts in this thread. Doing so will keep make it easier for members to track issues you may be having. 

You did a good job posting your data. It would help if you go into the OSCAR  preferences and turn off the calendar and pie chart in the left pane. Doing so will give more room for displaying the statistics section. You can also turn off VS2 and breathing not detected. Neither are helpful in evaluating your treatment. There is a link in my signature on organizing your charts.

Best of luck with your treatment.
Mitch


RE: New to CPAP need a bit of help - AMD386 - 03-29-2020

thanks for the info i will  like


RE: New to CPAP need a bit of help - SarcasticDave94 - 03-29-2020

Welcome to Apnea Board.

I agree with MitchS on the increased high number for pressure. Maybe it's me, but there may also be some event clustering that may be chin tucking. If this exists, a typical solution is a soft cervical collar. If needed, there's a wiki area describing this. Here's the collar wiki address: http://www.apneaboard.com/wiki/index.php/Soft_Cervical_Collar

Last one for now, on your OSCAR chart, you should turn off the VS2 flag. Best wishes you get successful treatment.


RE: New to CPAP need a bit of help - Sleeprider - 03-29-2020

You have received some good information above and I agree with both Mitch and Dave. For pressure, with your current settings at 5 minimum and 7 maximum, I think you need a new higher range to deal with the mainly obstructive events we see here. I don't know how you ended up with such an unusually low range, but I think you need to be in the range of 7.0 to 10.0. This should stabilize the airway and help with a lot of the problems we see here. A collar may be needed based on the clusters, but I'd hold off until you try the higher pressure. Please provide feedback on comfort with the higher pressure, but I'm sure this will work out better.


RE: New to CPAP need a bit of help - AMD386 - 03-29-2020

okay i will set it to 10 thanks for your support


RE: New to CPAP need a bit of help - Sleeprider - 03-29-2020

(03-29-2020, 08:46 AM)AMD386 Wrote: okay i will set it to 10 thanks for your support

You have an Auto CPAP. I'm recommending that you set the minimum pressure to 7.0 and the maximum pressure to 10.0.


RE: New to CPAP need a bit of help - AMD386 - 03-29-2020

you think its okay to set it 7 from 5 since my doc set it to 5 thats why i ask


RE: New to CPAP need a bit of help - AMD386 - 03-29-2020

 Sleeprider i set it up like you say thanks for your help will report back


RE: New to CPAP need a bit of help - Sleeprider - 03-29-2020

I can tell you did not have a titration test, right?  Your doctor set up your machine with a low pressure and will do exactly what we are doing here until he finds the pressure range that works.  We're just going to get there faster and easier. It is unusual for a doctor to limit maximum pressure to 7.0, and we most often see a range of 5-20 for initial auto CPAP titration. It would not surprise me if there was an error in setting up your Auto CPAP. 

The easiest way to understand this is to understand what is in a CPAP titration protocol. I will post the Philips CPAP Titration Protocol below.  As you can see, the initial pressure starts low, but if obstructive events (OA, H, FL), are observed then we increase pressure.  The protocol continues until obstructive events resolve, or presure is not tolerated. The Resmed protocol does the same thing, but I think it is more understandable. 

We observed your initial chart with Auto CPAP where the starting pressure was 5.0 and increased to 7.0 for a significant period of the night. Events did not fully resolve at 7.0, so we can infer that your ideal CPAP therapy pressure is likely higher.  We can take a more conservative approach and increase the minimum to 6.0 and maximum to 9.0.  The objective is the same, to find out what pressure range results in relief of obstructive events and is comfortably tolerated.  Your machine is actually slow to proactively increase pressure to prevent events, and we know Philips users need more minimum pressure than Resmed users to get good results, so my recommendation of a minimum pressure of 7.0 was based on the observation that at that pressure, you still needed higher pressure to fully resolve events.  Thus my suggestion for 7-10.


[Image: attachment.php?aid=9360]

[Image: attachment.php?aid=4115]