Change date range on Statistics Report - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum) +--- Thread: Change date range on Statistics Report (/Thread-Change-date-range-on-Statistics-Report) Pages:
1
2
|
Change date range on Statistics Report - Heliop - 04-19-2020 I need to change the date range for the Statistics Report. I don't need monthly but need 1/1/20 forward. It is for the FAA and each year they want specific dates on the standard format. Also is there a way to have the report show that my compliance is set for 6 hours and not the usual 4 hours. Thank you Note- I just downloaded the new version RE: Change date range on Statistics Report - DeepBreathing - 04-19-2020 Hi Heliop. Welcome to Apnea Board. I don't think there's a direct way to do exactly what you want, but I am working up a work-around. If all your data is on a single SD card it should be easy. If, not then the process will be a bit more convoluted. RE: Change date range on Statistics Report - DeepBreathing - 04-19-2020 OK, assuming it's all on one card, we can do it in three steps: 1. Create a new profile 2. In Preferences, set the "Do not import" date 3. Also in preferences, change the compliance setting. 1. Create a new profile
2. Change the "Do not import" date.
3. Change the compliance setting.
Now go to the Welcome page and import data from your SD card. If I have got this right (and you have followed the instructions) you should now have a statistics readout from 1/1/20 with compliance set for 6 hours. At the bottom of the screen is a toggle for standard or monthly report mode. I hope this works, and gives you what you need. RE: Change date range on Statistics Report - GuyScharf - 04-19-2020 (04-19-2020, 01:07 AM)Heliop Wrote: Also is there a way to have the report show that my compliance is set for 6 hours and not the usual 4 hours. OSCAR 1.1.0 will show the number of hours compliance is set for on the statistics report. RE: Change date range on Statistics Report - Heliop - 04-19-2020 Thank you for the quick response. I do have the information of two SD cards because I switch between a Dreamstation and Dreamstation Go. Is there another software available that might work? The FAA is only looking for the basics; 6 hour compliance % and average AHI, machine pressures min and max. RE: Change date range on Statistics Report - pholynyk - 04-19-2020 I think that you can use two cards from the same line without problems. As DB suggested, set a up a new profile with an Ignore Before date and 6 hours for compliance, then import from both cards and the data with mesh OK... assuming you didn't switch machines in the middle of the night... then... I'm not sure. Actually, I'm not sure at all;that's why you should set up a new profile for combing the data from two Dreamstations. RE: Change date range on Statistics Report - sawinglogz - 04-19-2020 That should work, especially for PR machines. It's possible OSCAR might complain if you used both machines on the same night. Let us know if you run into any trouble. RE: Change date range on Statistics Report - Heliop - 11-09-2020 Just updated to the 10/20 version. I have two different machines so therefore two data cards and I appreciate the previous replies but I am wondering if the new version allows for the date range change in Statistics? Hopefully something simple. Thank you RE: Change date range on Statistics Report - GuyScharf - 11-09-2020 (11-09-2020, 02:36 PM)Heliop Wrote: Just updated to the 10/20 version. I have two different machines so therefore two data cards and I appreciate the previous replies but I am wondering if the new version allows for the date range change in Statistics? Hopefully something simple. Thank you Sorry, we have not yet added a feature to set a date range on the statistics report. RE: Change date range on Statistics Report - GuyScharf - 12-01-2021 Please see questions about a date range at http://www.apneaboard.com/forums/Thread-OSCAR-Need-adjustable-date-range-in-Statistics-Tab?pid=423808#pid423808 and respond there. |