+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: programimng resmed vpap adapt sv (/Thread-programimng-resmed-vpap-adapt-sv)
programimng resmed vpap adapt sv - sparky2013 - 03-29-2013
What a great place to get information on cpap use.
My query is, I have a newer (purchased 11/2011) ResMed VPAP Adapt SV, and want to know how to program it and turn off the alarm it has on it. I know my in pressure and out pressures, Can someone help me, Please!
RE: programimng resmed vpap adapt sv - trish6hundred - 03-29-2013
Hi sparky2013,
WELCOME! to the forum.!
I'm not familiar with the programming on that machine but hang in there and someone will be able to help you soon.
Best of luck to you.
RE: programimng resmed vpap adapt sv - Pete - 03-29-2013
(03-29-2013, 01:08 PM)sparky2013 Wrote: What a great place to get information on cpap use.
My query is, I have a newer (purchased 11/2011) ResMed VPAP Adapt SV, and want to know how to program it and turn off the alarm it has on it. I know my in pressure and out pressures, Can someone help me, Please!
Hi Sparky2013
I use the same machine as you do, but I don't have the alarm enabled. What you need is the clinician's manual which you can get here on the forum, or if you send me a PM I'll send it to you through email.
to get to settings , Push down the raised button on the right side at the same time holding down the lower button with the two check marks for about three seconds. That takes you to the settings menu... where you can review and make changes. Just be sure not to change just anything though.
Ratt