+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Dreamstation Pressures Not Displaying (/Thread-Dreamstation-Pressures-Not-Displaying)
Dreamstation Pressures Not Displaying - mbizanovich - 09-26-2020
I have a Dreamstation Auto Bi-Pap machine. I am trying to review the pressures I have been using. That information is not displaying on my machine in clinician mode. I can see Therapy hours, AHI, Mask Fit, but not Periodic Breathing or 90% pressures. I have lost a lot of weight and assume my pressures are way lower, but would like to know what they are.
RE: Dreamstation Pressures Not Displaying - OpalRose - 09-26-2020
Go to Device Settings.
From there a Device Settings Sub- Menu should appear.
Show AHI/Fit/PB
You can select whether or not the Apnea/Hypopnea index, Mask Fit averages, and Periodic Breathing averages are displayed on the Patient Info screens.
If enabled on the device, you will have the option to choose the units of pressure.
Order a Clinicians manual here:
https://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual
RE: Dreamstation Pressures Not Displaying - mbizanovich - 09-29-2020
Thanks for your response. Based on your answer, I was able to change the settings to display the advanced menus. That's all it took. Thanks again!