+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Looking for Tech Manual for Dreamstation ASV (/Thread-Looking-for-Tech-Manual-for-Dreamstation-ASV)
Looking for Tech Manual for Dreamstation ASV - racprops - 09-29-2020
Looking for the DreamStation BiPAP Auto SV Service and Technical Manual
Also deep Titration instructions more involved that this SIMPLE version:
http://incenter.medical.philips.com/doclib/enc/9792335/BiPAPAutoSVAdvanced_Protocol.pdf%3Ffunc%3Ddoc.Fetch%26nodeid%3D9792335
Rich
RE: Looking for Tech Manual for Dreamstation ASV - SarcasticDave94 - 09-29-2020
Did you try the link for CPAP Setup Manuals here? I'd think DreamStations should be in there. Any aspect we can comment on? Admitted, I've not had their SV Auto, but we can try to answer what you're searching for.
Dreamstation BiPAP AutoSV CLINICAL MANUAL - racprops - 09-29-2020
Looking for the Dreamstation BiPAP AutoSV CLINICAL MANUAL
I am looking for a full complete step by step Titration instructions more involved that this SIMPLE version:
http://incenter.medical.philips.com/docl...%3D9792335
Thanks.
Rich
RE: Looking for Tech Manual for Dreamstation ASV - OpalRose - 09-29-2020
Check the Private Files and Links Forum. You may find it there.
RE: Looking for Tech Manual for Dreamstation ASV - SuperSleeper - 09-29-2020
More info:
Service & Tech Manuals are different than the "Clinician" manuals (also called "Setup Manual" or "Provider Manual").
Clinician Setup Manuals can be requested via email by following the directions on this page:
https://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual
For the Service & Tech Manuals, please log into your forum account and click on the link in this post:
http://www.apneaboard.com/forums/Thread-LINKS-to-Members-Only-FILES
That's our "Members-Only Files Page" link, which contains many of the Service/Tech Manuals for various machines.
You will find the DreamStation BiPAP Auto SV Service and Technical Manual (and others) there.
RE: Looking for Tech Manual for Dreamstation ASV - SuperSleeper - 09-29-2020
Rich, I merged your two identical threads into this one thread.
Check out that Service/Tech manual from the link I posted above. That manual is over 140 pages - does it give you what you're looking for?
If you're looking for more detailed titration instructions, for the most part, detailed titrations are only done using sleep lab equipment. You can self-titrate to a degree, but I'm not sure there are valid "official" instructions for that specific machine out there that go into more detail than the flowchart PDF in your original post - at least not instructions for titration using the ASV alone (without the appropriate lab equipment attached).
Of course, using OSCAR, you can dial-in your settings to get the best possible treatment (pressures & other settings), but that's not the same as a being titrated in a sleep lab setting.
I do know that many times, you'll get better optimized therapy by self-titrating using OSCAR and using advice from experienced forum members here, since sleep lab titrations are done in very controlled environments that don't really mimic your "real" bedroom sleeping environment.
Perhaps others can chime in on this, as I'm not exactly sure what you're attempting to do when you talk about obtaining "deep titration instructions".
RE: Looking for Tech Manual for Dreamstation ASV - SarcasticDave94 - 09-29-2020
FWIW I did the self titrate on my ResMed 10 ASV in 2017, so it is doable. Sleeprider and bonjour especially had a key part to play in success. I used SleepyHead then later OSCAR to view data and adjust for good numbers and feel.
RE: Looking for Tech Manual for Dreamstation ASV - racprops - 09-29-2020
SO MANY THANKS...
I do believe that manual will help with some of the questions...
And your right I am trying to fine tune my system.
I also have been have problems with Volume or as I was calling it air flow.
My PR System One ASV 950 and 960s would have a good air flow or volume and this would like of push the air into my lings, gently but slightly positively.
As long as my machine was working this was a constant feature of the old machines.
AND that was what I wrote up as a NEW way for my rebuild 950 to fail at 4000 hours to fail, a nearly total lost of air volume.
My Dreamstation ASV seems to all over the place volume wise, it has has so much volume it blows the mask off, pressures stay correct...most of the time the volume drops so low I feel I am working hard to breath...
But that MAY be correct, reading a great review here on these systems and others seem to say these are more refined and perhaps I am better off with this system being that way.
I got this unit Sept 7th. As you can see from the over view chart it is great many nights and bad other nights, with no rime of reason...
[attachment=27043]
And will need that host site to work with people using OSCAR...
Rich
RE: Looking for Tech Manual for Dreamstation ASV - SuperSleeper - 09-29-2020
Agree with Dave.
Rich, if your intent is to get the best possible therapy, the thing to do would be to download, install & use the OSCAR software, then start a new thread titled something like "Racprops's ASV therapy", then post some OSCAR charts for folks to look at and analyze so that they can recommend a course of action to fine-tune your therapy. It's best to keep all your ASV therapy discussions in one thread so folks can see the history of your therapy and respond accordingly.
If you're unfamiliar with OSCAR, I'd start with reading the OSCAR Wiki here:
http://www.apneaboard.com/wiki/index.php/OSCAR_Help
Also pay attention to the sections on how to organize your charts and taking a screenshot for posting on the forum.
it will take a bit of back-and-forth discussion, but that will likely bring you the best results.
RE: Looking for Tech Manual for Dreamstation ASV - racprops - 09-29-2020
Found the service manual for System One machines.
So are there any place to get parts??
My problems seem to be Volume sensors in a 950 which Phillips will no long sell part for, and possibley volume and pressure sensors in a 960.
Up until now my only recourse was a total rebuild by a local company with a new mother board and fan at $250.00 to $275.00.
I do not think the fan was bad in either case but while in there it seemed like a good idea.
But if these sensors can bought else where...
Rich