+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Resmed Airsense 10 (/Thread-Resmed-Airsense-10--30515)
Resmed Airsense 10 - miket1958 - 09-30-2020
I have had a Resmed Airsense 10 since 2017. It had always been extremely quiet, but 2 nights ago, I could hear my breathing sounds through the machine. I replaced the hose, mask, water tank, and filters, but no change. What could be causing this?
RE: Resmed Airsense 10 - Sleepster - 09-30-2020
There are two gaskets (or seals) where the water tank mates up with the machine. I've heard they're both replaceable. I can see how to remove one of them, and a replacement is available from Supplier #1. I don't know how you would replace the other one.
Anyway, remove the water tank and look at the seals. You may be able to just clean them with a wet cloth.
RE: Resmed Airsense 10 - staceyburke - 09-30-2020
I don't know if this is what you hear but check out this thread..
http://www.apneaboard.com/forums/Thread-ResMed-AirCurve-10-Fan-Motor-Loud?highlight=machine+noise
RE: Resmed Airsense 10 - jaswilliams - 10-02-2020
I would also try replacing the filter