+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum)
+--- Thread: Pulse Changes missing in Overview OSCAR 1.2.0 (/Thread-Pulse-Changes-missing-in-Overview-OSCAR-1-2-0)
Pages:
1
2
Pulse Changes missing in Overview OSCAR 1.2.0 - SevereApnea - 10-18-2020
Finally bit the bullet and upgraded to OSCAR on Laptop to test run this.
Imported last few days data, all working well.
Oh, And all the daily data under Overview>Pressures are now there which is great.
But on the Updated Laptop OSCAR 1.2.0 the Pulse Changes are missing in the Overview tab.
What shall I do to make them re-appear please?
Thanks
Chris
Plse see attached.
[attachment=27418]
[attachment=27417]
RE: Pulse Changes missing in Overview OSCAR 1.2.0 - Crimson Nape - 10-18-2020
Go to File → Preferences → Waveforms. Scroll down to the Oximeter Waveforms and place a checkmark in the Overview column for this parameter.
RE: Pulse Changes missing in Overview OSCAR 1.2.0 - SevereApnea - 10-18-2020
Hi Crimson Nape thanks for the fast reply.
I have checked this as suggested still not showing the PR changes
(I noticed now the SpO2 is also not showing)
does this mean i have to re-import all data?
Or purge first?
or does Rebuild data do the same thing (excuse my ignorance, I am not clear on what rebuilding does)
thanks!
Edit: image now attached.[attachment=27420]
RE: Pulse Changes missing in Overview OSCAR 1.2.0 - Jeff8356 - 10-18-2020
I found mine in Preferences > Events
Scroll down to the "Oximeter Events" and tick the box under the "Overview" column
Should show up in Overview after that.
RE: Pulse Changes missing in Overview OSCAR 1.2.0 - SevereApnea - 10-19-2020
(10-18-2020, 11:08 AM)Jeff8356 Wrote: I found mine in Preferences > Events
Scroll down to the "Oximeter Events" and tick the box under the "Overview" column
Should show up in Overview after that.
Yes I have that checked as well. What that does is show up in the Events Flags section.
Still nothing when go to Overview and select the following sections:
Flow Rate: nothing there.
SpO2: nothing in the Overview section. All my daily charts show the oxygen levels.
Pulse Rate: nothing there, same comment,
Pulse Rate change: nothing there.
How would I get this data to show in the Overview section please?
On another note: I am looking at this in v1.0.1-r-1 on the Desktop and the Overview Section still has data missing.
see attached here:
[attachment=27441]
The Pulse Rate change data is there: not in V1.2.0 on my laptop (same SD card used)
The Flow Rate data is missing!
The SpO2 has One Data entry under April 19, then when I hover over it is says 18 Oct 2020. (?)
Same with Pulse Rate.
BUT all the Pulse Rate Change data is there.
I don't believe this can be a bug because others would have noticed it, is it my system or my not understanding OSCAR well enough yet?
thanks for all help in advance.
RE: Pulse Changes missing in Overview OSCAR 1.2.0 - Jeff8356 - 10-19-2020
Ticking those boxes is what gets it to show up in Overview for me.
[attachment=27442]
[attachment=27443]
I don't normally have them displayed at all. Just ticked them to try to help figure out whats going on with yours and they showed up in Overview. Strange....
RE: Pulse Changes missing in Overview OSCAR 1.2.0 - SevereApnea - 10-20-2020
Yep it is strange.
do you think a Purge data or rebuild might help?
I have half a mind to just remove the profile from Oscar in my laptop and then import all data again.
Might just give that a try.
RE: Pulse Changes missing in Overview OSCAR 1.2.0 - Jeff8356 - 10-20-2020
Which ever you decide, don't forget to make a backup of your current OSCAR_Data first. Don't ask me how I know that....
RE: Pulse Changes missing in Overview OSCAR 1.2.0 - SevereApnea - 10-21-2020
thanks for the backup reminder Jeff!
This is what i have tried so far.
Laptop Windows 10 64 bit.
Updated OSCAR 1.2.0
Renamed my existing profile xxx_bkp
I have now created a new profile on my Laptop: Trial and Own.
Imported data from my Backup folder from my Trial of CPAP in Feb/March (machine 1)
Then imported all data since then from my own machine. (machine 2)
I now have data all the way from 23rd Jan 2020 till now in one profile.
Under Overview Tab I still see no Pulse Rate or Pulse Rate changes or Oxygen values!
I have rebuilt CPAP data from Machine 1 for the first set of data from my Trial period.
I have rebuilt data from Machine 2 from my own machine.
Then under Preferences > Events Oximeter Events I have checked Pulse and checked this in the Overview column.
(under Event Flags these are showing up in the PC channel).
Then under Preferences > Waveforms > Oximeter Waveforms both boxes for Pulse Rate and SpO2 are checked.
Clicked OK.
Exit Oscar, open Oscar:
Under Overview this is what is showing:
Pulse Rate: data for 20th Oct only.
SpO2: data for 20th Oct only.
Pulse change: nothing.
So at this stage I am have tried everything I know so far.
Is there something I have missed?
Would love to get this solved: I think the overview tab is *very* useful to find trends in a single glance.
RE: Pulse Changes missing in Overview OSCAR 1.2.0 - Jeff8356 - 10-21-2020
I may have missed this..... which Oximeter are you using?