+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [Equipment] water chamber (/Thread-Equipment-water-chamber)
water chamber - ifly5 - 11-08-2020
i recently had water on my night night stand from my air sense 10. i determined my water tank has a leak on the seam. upon looking in the bottom i saw black spec's and around the corners of the chamber. i ordered a new tank. this is the second day of use on new tank and this morning i looked and saw black spec's in new tank. i have no idea where it is from. i always use distilled water. i checked hoses, filter is clean. could there by something in air 10 that is breaking down causing my black spec's. puzzled??????
RE: water chamber - Crimson Nape - 11-08-2020
Hi ifly5! -
What does your air filter look like? Have you cleaned it recently?
RE: water chamber - ifly5 - 11-08-2020
my machine filter is clean and new change every month needed or not, so-clean filter new also.
RE: water chamber - RayBee - 11-08-2020
Could it be some debris coming from something internal to the machine? Fan, motor? I would highly doubt it. And I'm not sure how you would determine if that was actually the source without a complete disassembly. I suppose you could see if the black spec is attracted to a magnet. That would tell you if it is a ferris metallic material and potentially early mechanical failure.
RE: water chamber - ifly5 - 11-08-2020
thanks for the magnet idea.
RE: water chamber - Canuck 2 - 11-08-2020
If you do not find anything in your machine to contaminate your water chamber, I think a good cleaning and microwave your distilled water before dumping into the chamber might be interesting experiment. Microwave it to boil in a cup and let it cool and dump it into the chamber nothing should survive after that abuse and observe is all I can think of.
RE: water chamber - Big Guy - 11-08-2020
Are the black specs stuck to the chamber, or are they just loosely floating around?
RE: water chamber - ifly5 - 11-08-2020
i have loose material spec's floating in chamber. i also changed so-clean filter. i got to the inside of so clean filter, looks like charcoal square perforated type, it could be my spec's in chamber, but i didn't see any in so-lean filter housing. has any body had this so-clean filter problem.
RE: water chamber - Big Guy - 11-08-2020
Sounds as if they might be tiny bits & pieces of charcoal.