Changing from Philips to Prisma due to recall - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: Changing from Philips to Prisma due to recall (/Thread-Changing-from-Philips-to-Prisma-due-to-recall) |
Changing from Philips to Prisma due to recall - Naama - 06-28-2021 Hi everyone, Due to the recent recall, I changed my CPAP from the DreamStation to the Prisma Smart. I actually loved the DreamStation.... But... Better to not breath carcinogenic substances I had a good experience with the Prisma last night, but I can't figure out how to read the data from the machine... In the DreamStation I programed it so that I could see the AHI, 90% pressure and mask leaks, right on the CPAP's screen and without any special button-pushing (I never used a software, actually). Any Prisma users here that can tell me if it's possible to program the machine so that at the very least I can see my AHI on the machine's screen? Thanks, Naama. RE: Changing from Philips to Prisma due to recall - OpalRose - 06-28-2021 I'm not familiar with your machine, but these general instructions will get you into the provider menu. Weinmann Prisma series with buttons: When in clock mode, press and hold the rightmost buttons (menu and ramp) for a few seconds until MENU CLIN appears. Then press the + (settings) button. Weinmann Prisma series with touch screen: Press and hold the "info" icon for a few seconds, then choose "login" to enter setup. |