Question on Sleepyhead Leak stat - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: Question on Sleepyhead Leak stat (/Thread-Question-on-Sleepyhead-Leak-stat) |
Question on Sleepyhead Leak stat - Tom in RI - 05-21-2013 With apologies in advance as I am sure this question has been asked and answered before but I just couldn't find it. I've been on the hose for 10 years but only recently did I look for any Apnea forums. Found this one and learned about Sleepyhead. One week in and I am checking my stats every morning and trying to understand any correlations. One thing I am having trouble understanding is the Leak stat, mine is just over 30 L/min. This is Total Leak. If I am understanding what I am reading this includes air exhaled and exiting the mask. My AHI is running between 1-2, I assume this is the most important stat. If anyone can give me any sense of perspective on the Leak stat I would appreciate it. And a rant, why do humidifier reservoirs have so many fins making it difficult to wipe excess moisture in the morning? Thanks in advance for replies. RE: Question on Sleepyhead Leak stat - PaulaO2 - 05-21-2013 There's a setting in SH to change it to unintentional leak vs total leak. Unintentional is anything over the usual mask venting. RE: Question on Sleepyhead Leak stat - zonk - 05-21-2013 (05-21-2013, 07:53 AM)Tom in RI Wrote: One thing I am having trouble understanding is the Leak stat, mine is just over 30 L/min. This is Total Leak.What pressure are you on? 30 L/min seem too low for total leak Maybe "system one resistance setting" makes no difference From what read, for non-Respironcis masks ... resistance setting is "0" PR System One Mask Resistance Settings http://z5.ifrm.com/5902/67/0/p1031700/MaskSettingsforSystemOneResistanceC.jpg RE: Question on Sleepyhead Leak stat - Tom in RI - 05-22-2013 Hi Zonk, I am not 100% sure but I believe my pressures are 16 and 9. RE: Question on Sleepyhead Leak stat - zonk - 05-23-2013 (05-22-2013, 04:03 PM)Tom in RI Wrote: Hi Zonk, I am not 100% sure but I believe my pressures are 16 and 9.See the table for ResMed masks ... Pressure vs. Flow Rates http://www.resmed.com/assets/documents/service_support/pressure_flow_rates/1012648_pressure-vs-flow_usa_eng.pdf RE: Question on Sleepyhead Leak stat - Tom in RI - 05-24-2013 Thanks Zonk, as far as I can tell, my pressures are generally staying below the maximum. So I am guessing that leaks are minimal for me. RE: Question on Sleepyhead Leak stat - spdklls99 - 06-27-2013 (05-21-2013, 11:05 AM)PaulaO2 Wrote: There's a setting in SH to change it to unintentional leak vs total leak. I don't seem to be able to find this setting anywhere in sleepyhead. could you be more specific? |