+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum)
+--- Thread: Event flagged shifted by 2 minutes after adjusting time on machine (/Thread-Event-flagged-shifted-by-2-minutes-after-adjusting-time-on-machine)
Event flagged shifted by 2 minutes after adjusting time on machine - ubersteiny - 08-26-2021
Not sure if I wasn't supposed to do this. But the time on my Airsense 10 Autoset had shifted by 2 minutes, so I figured I'd adjust the clock to be accurate. However, the data from last night now has all the event flags shifted by the amount I adjusted the clock. Not sure if this is just a 1 night anamoly, or if I should be adjusting something else. Example attached.
RE: Event flagged shifted by 2 minutes after adjusting time on machine - pholynyk - 08-26-2021
I'm guessing you used the clock drift function in Preference... Unfortunately, I don't believe anybody understands just how it works.
It may be that only the data imported before the setting was changed, but I'm not sure. I'm not even sure what will happen if you rest it to zero.
If you need to correct the ResMed clock, it is best to do it well past noon, before any use for the new day.
RE: Event flagged shifted by 2 minutes after adjusting time on machine - ubersteiny - 08-26-2021
(08-26-2021, 05:04 PM)pholynyk Wrote: I'm guessing you used the clock drift function in Preference... Unfortunately, I don't believe anybody understands just how it works.
It may be that only the data imported before the setting was changed, but I'm not sure. I'm not even sure what will happen if you rest it to zero.
If you need to correct the ResMed clock, it is best to do it well past noon, before any use for the new day.
I only changed the actual time on the AirSense 10. I changed it at about 8pm and went to bed/started therapy at 9pm.
RE: Event flagged shifted by 2 minutes after adjusting time on machine - pholynyk - 08-26-2021
OK, that's how I do it as well. So I'm not sure what happened to shift one set of data from the other. There may be an issue with the display routines, but I don't know what may have triggered it. Let us know if keeps happening.
RE: Event flagged shifted by 2 minutes after adjusting time on machine - ubersteiny - 08-27-2021
Happy to report events recorded normally last night. Seemed to be just a one off.