Philips Respironics System One Software

Philips Respironics System One Software - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Philips Respironics System One Software (/Thread-Philips-Respironics-System-One-Software)

Philips Respironics System One Software - packgreen49 - 06-02-2013

Hi,
What software works for me to download my data? I tried Sleepyhead, but did not work.
Ron

RE: Philips Respironics System One Software - zonk - 06-02-2013

(06-02-2013, 08:47 PM)packgreen49 Wrote: Hi,
What software works for me to download my data? I tried Sleepyhead, but did not work.
Ron

Hi Ron welcome to the forum
If your machine model number 460 or 560, you need to install the patch too to work with 60 series machines
The model number displayed on the label placed at the bottom of the machine, take the water tank out before checking

RE: Philips Respironics System One Software - packgreen49 - 06-02-2013

Hi,
I see a 560 on the bottom. How do I install the patch?
Ron

RE: Philips Respironics System One Software - zonk - 06-02-2013

(06-02-2013, 09:47 PM)packgreen49 Wrote: Hi,
I see a 560 on the bottom. How do I install the patch?
Ron

See the notes for 60 series machines
http://www.apneaboard.com/forums/Thread-SleepyHead-Software-Download-Link-free-open-source-software

RE: Philips Respironics System One Software - trish6hundred - 06-02-2013

Hi packgreen49,
WELCOME! to the forum.!
Best of luck to you.

RE: Philips Respironics System One Software - archangle - 06-03-2013

Don't bother with the patch. Just download the new full version 0.9.3.

http://sourceforge.net/projects/sleepyhead/files/SleepyHead-0.9.3-beta-win32-setup.exe/download

FYI for others, it doesn't auto update right now. You need to download the full file.

Also, the sourceforge site doesn't select the right "current version" when you go to the main page yet.

RE: Philips Respironics System One Software - SuperSleeper - 06-03-2013

(06-03-2013, 06:16 PM)archangle Wrote: Don't bother with the patch. Just download the new full version 0.9.3.

http://sourceforge.net/projects/sleepyhead/files/SleepyHead-0.9.3-beta-win32-setup.exe/download

FYI for others, it doesn't auto update right now. You need to download the full file.

Arch, is this a new version of SleepyHead now? and the 60 series machines are now fully supported in the new version with no patch necessary?

Also, is Mark back in the saddle or is this being done by others?

RE: Philips Respironics System One Software - archangle - 06-03-2013

(06-03-2013, 06:20 PM)SuperSleeper Wrote:
(06-03-2013, 06:16 PM)archangle Wrote: Don't bother with the patch. Just download the new full version 0.9.3.

http://sourceforge.net/projects/sleepyhead/files/SleepyHead-0.9.3-beta-win32-setup.exe/download

FYI for others, it doesn't auto update right now. You need to download the full file.

Arch, is this a new version of SleepyHead now? and the 60 series machines are now fully supported in the new version with no patch necessary?

Also, is Mark back in the saddle or is this being done by others?

It's number 0.9.3, so I presume it's "THE" version of SH for now. I believe it's the most up to date version of everything, i.e. no patch needed.

I don't know about Mark's saddle status or if it's some of the other contributors. I haven't seen any posts from Mark lately.

RE: Philips Respironics System One Software - SuperSleeper - 06-03-2013

(06-03-2013, 06:29 PM)archangle Wrote: It's number 0.9.3, so I presume it's "THE" version of SH for now. I believe it's the most up to date version of everything, i.e. no patch needed.

Thanks, I also updated the download link in our SleepyHead download thread HERE.

Coffee

RE: Philips Respironics System One Software - zonk - 06-03-2013

(06-03-2013, 06:29 PM)archangle Wrote: It's number 0.9.3, so I presume it's "THE" version of SH for now. I believe it's the most up to date version of everything, i.e. no patch needed.

Maybe someone with 60 series machine test the new version and let us know if no need to install the patch with 60 series machines